You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6s Omnidirectional Earset Microphone For Sennheiser Transmitters (low Gain, Light Beige)

Countryman E6s Omnidirectional Earset Microphone For Sennheiser Transmitters (low Gain, Light Beige)
  • Product Code: ga211470
  • Availability: In Stock

$1,533.00 $2,268.84

The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 1mm diameter cable. It terminates to a Microdot connector for use with Sennheiser wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    Microdot Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

Key Specs
Compatible TransmittersSennheiser: SK2012
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL140 dB (A-Weighted)
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x Microdot Male
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersSennheiser: SK2012
Polar PatternOmnidirectional
Included Tone/Pattern Caps+0 dB Flat, +4 dB Bright, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL140 dB (A-Weighted)
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x Microdot Male
Cable Length5' / 1.52 m
Cable Diameter0.04" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorLight Beige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. Is this mic good for singing?

A: Hi Patrick - while the MKE 600 is an exceptionally versatile microphone for voice applications with respect to interviews, voice over and use cases that require a highly directional polar pattern, it wouldn't be my first choice for singing. Sennheiser offers a wide range of microphones for vocals and I'd direct you to one of our best sellers: e 835. Please feel free to reach out to B&H directly via chat, email or over the phone and I'm certain their team can help guide you once they have a better understanding of your specific application and needs.

Q: 2. How is this mic when used for indoor interviews on a boom?

A: You would connect it to a compatible shockmount and that shockmount would have the threading to screw onto the end of a boompole. Typically the threading for that is 3/8''.

Q: 3. Can I plug this into the Sony Fx9 without a battery and have it run off of the camera battery/phantom power? Thank you!!!!!!!!!!

A: Yes, the Sennheiser MKE 600 Shotgun Microphone can be connected to an XLR input on the Sony PXW-FX9 Full-Frame Camera and activated using phantom power.

Q: 4. mke 600 work with pc if we use xlr to 3.5 without use any audio interface thanks

A: The MKE-600 can be used without an interface when using the mic with battery power and the proper cable adapter. Sennheiser offers properly wired adapter cables. These are recommended for connection to 3.5mm TRS or TRRS inputs.

Q: 5. I have a canon vixia HF G30 and I know you need to have a powered mic to give it enough output. Would this mic work with it converting the XLR to a 3.5mm plug??

A: Yes, there's an internal AA battery option on the mic to give you +48V

Q: 6. It says a windjammer is included in the description. Anyone know which brand/model?

A: The blimp is made by Rycote as is the windjammer.

Q: 7. Does this mic and an XLR to 3.5mm stereo plug record in stereo on the camera, or do you need to convert to dual mono in post production?

A: If you use the recommended Sennheiser cable KA600 the microphone signal will be recorded on both channels of the camcorder.

Q: 8. The XLR connector on the MKE 600 appears to be upside down, is this the case with all Sennheiser shotgun mics, or just the MKE 600?

A: Not sure what you mean by upside down, but the orientation of the XLR connector is irrelevant to the performance of the microphone.

Q: 9. The MKE 600 is shown taking 1.5 volt AA batteries. Can it handle a 3.7 volt AA lithium battery?

A: No, a 3.7V AA lithium battery is not compatible for use with the Sennheiser MKE 600 Shotgun Microphone. Sennheiser recommends using only 1.5V or 1.2V single-use or rechargeable AA batteries with the MKE 600.

Q: 10. Wanting to know how well this mic "ignores" side noise. We do a lot of quick interviews in bars and brewery taprooms and our Audio-Technica AT875R attached to a Canon XA10 picks up a ton of noise off to the sides of of the mic and camera. Need something that mostly picks up what in front of it. Hoping this mic does?

A: There’s a good video on YouTube demonstrating the 875r, 897 and MKH60 and the 897 seemed to have the best off-axis rejection. https://youtu.be/XyGZA9FQudU

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Countryman Isomax 2 All Purpose Microphone

$1,044.00 $1,357.20

Products You May Like

Holdland Iris Lens Cap (67mm)

$300.00 $471.00

Maxell Cd-r 700mb Disc (100)

$68.97 $108.97

Mackie Hm-4 4-way Headphones Amplifier

$108.00 $164.16

Listen Technologies 6-way Rf Antenna Combiner

$1,181.37 $1,677.55