The Ultimate Support Bag-99 is a heavy-duty, padded, zippered tote bag made to carry one Telelock TS-99 or TS-88 speaker stand. The bag is made from a 600d water-resistant PVC coated fabric and has a three year warranty.

Heavy-duty, padded tote bag

• One Ultimate Support Telelock TS-99 or TS-78 speaker stand

Related Questions and Answers

Q: 1. I have a manfrotto MT055CXPro3 carbon fibre tripod with a collapsed length of 24.5 plus a Jobu Heavy Duty 3 Gimbal Head which adds another 9.5 for a total length of 34 . The internal measurements of the MBAG90PN conflict in the description. Could you please confirm if 34 in length will fit and what the diameter of the rounded end is; is enough width to accommodate the Jobu Heavy Duty 3 Gimbal Head which is 10 wide? Please advise asap, thank you!

A: No problem I have my hold tripod with head attached and plenty of room to spear plus some background legs in bag far as spec of 34 . You get that plus a bit more when you position on and angle before zipping. The zipper is rough needs broken in its good n well padded I recommend.

Q: 2. Hey there could the iFootage Wild Bull T Series T7 Carbon Fiber Tripod with a 502HD head fit in this bag??

A: The MBAG75PN has a maximum capacity of 29.5 inches long. I have a tripod folded to its shortest length and head with a total length of 28 which fits, but I would not put in a longer tripod. The Wild Bull T7 has a folded length of 28.3 inches and the head has a working length of 5.1 inches. Unless you remove the head or tilt it down so that the combined length of the tripod and head is less than 29.5 inches it wont fit. The MBAG 90PN bag has a maximimum capacity of 35.0 inches. I would select that one.The wider. top part of my bag stretches to 7 inches more. I don't have any idea how the head with the long handle will fit. Does the handle unscrew? Does the head fold down?These bags are very nice but do not have any pockets

Q: 3. Does a Gitzo Mountaineer Series 1, 4 sections with Arca-Swiss Cube head fit in this bag?

A: Interior dimensions of the Gitzo GC3101 Padded Tripod Bag are ø: 5.5 x L: 28.0" / ø: 14.0 x L: 71.0 cm. This would fit the Gitzo GT1542 Mountaineer Series 1 Carbon Fiber Tripod with the Arca-Swiss C1 Cube Geared Head.

Q: 4. Is this sturdy enough to check on a flight without additional protection?

A: Yes, I have this bag, and I plan on checking mine in the fall. I do plan to use bubble wrap and a rubber band around the ball head for additional protection, just in case.

Q: 5. I have the Manfrotto MT055XPRO3 Aluminum Tripod, and the Manfrotto 502HD Pro Video Head with Flat Base, will it fit?

A: It should fit fine. The bag is very roomy, even for the larger heads.

Q: 6. Would this tripod bag hold 2-3 of the Manfrotto Alu-Ranker 9' light stands? The compact size of these stands is just under 42 , but I'm not sure if it can accommodate multiple stands. Thank you for any insight!

A: Lindsay, I'm not familiar with the stands but there was PLENTY of room in that bag for my tripod and Wimberly lens mount. Don't think you'll have much trouble fitting all in. Susan

Q: 7. What is the total load carrying capacity of this bag? Surprisingly couldn't find any literature on this anywhere. I carry a 110cm aluminum stand + a benro go tripod with photo head + a benro monopod with S4 head + a phottix Salado nano stand. They all fit pretty snug as my video kit but the weight comes up to 10kgs max. It would.be great if you could help me find the official answer on this. Thank you!

A: Manfrotto does not officially have a weight-rating for this bag, but it will not hold all of the stuff you have mentioned.

Q: 8. Does a combination of a wemberley gimbal head mounted on a gitzo systematic 5532LS tripod fit this bag?

A: I have my doubts whether this will work: if it does, it must be a very tight fit. In judging whether to buy this bag, I measured the overall length of the Wemberley 200 gimbal head mounted on a Gitzo GT5543LS Systematic Series 5 Carbon Fiber Tripod (Long) to see whether and how well it matched the B&H measurements for the largest of this Gitzo GC5101 Padded Tripod Bag, as stated above on this page. First measurement: Internal Head Diameter: 9.25 . By my measurement, the Wemberley head appears to be about 10 wide. Perhaps it will fit if its flat profile distorts the top of the bag somewhat out of round; but it looks as though there would not be much tolerance of any for that maneuver -- and who knows, it might stress the zipper over time. Second measurement: For Folded Tripod/Head Combos up to 35 . The overall length of the combination of collapsed tripod and head (about 33 ) is very close to B&H's stated interior dimension: so there may not be much play in the top of the bag to accommodate the Wemberley mounted by distorting the bag a bit out of round. Considering that the shoulder strap position might add further stress to the zipper, interior pressure on the zipper from an over-size head like the Wemberley could lead to zipper separation over time. As they say about lameness in horses, no hoof, no horse -- so, too, no zipper, no bag.

Q: 9. Will a GT3532 with a Benro GD3WH geared head fit in this bag?

A: The head does not fit in the bag. I have a special bag for my head and it clips to the strap

Q: 10. Does this bag provide enough protection for the tripod so that it can be put in with the checked baggage?

A: Do you mean inside a hard luggage or by itself? If you're thinking about by itself, this would not be suitable. Look into a rigid tripod container, instead.