You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6s Omnidirectional Earset Microphone For Sabine Transmitters (low Gain, Tan)

Countryman E6s Omnidirectional Earset Microphone For Sabine Transmitters (low Gain, Tan)
  • Product Code: ga211586
  • Availability: In Stock

$1,485.00 $2,049.30

The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is tan and comes with a 2mm diameter Duramax cable. It terminates to a Screw-on TA4-F connector for use with Sabine wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    Screw-on TA4-F Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

Key Specs
Compatible TransmittersSabine: SW16TX, SW30TX, SW1600, SW3000, ST50T
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL140 dB (A-Weighted)
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersSabine: SW16TX, SW30TX, SW1600, SW3000, ST50T
Polar PatternOmnidirectional
Included Tone/Pattern Caps+0 dB Flat, +4 dB Bright, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL140 dB (A-Weighted)
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. Does it come with a bag?

A: No. The following unit comes enclosed with JOBY Wavo On-Camera Vlogging Microphone Shockmount Foam Windshield TRS Cable TRRS Cable Limited 1-Year Warranty

Q: 2. Will it work with the NEX-5T (I have not been able to find any info regarding the difference between the 5T and 6 in regards to the accessory port).

A: Unfortunately, this microphone will not work with the Sony NEX 5T as it lacks the Multi-Interface Shoe that the Sony NEX 6 has.

Q: 3. Is this compatible with the EOS 90D?

A: The Canon DM-E1D Stereo Microphone is compatible for use with select Canon cameras that incorporate Canon's Multi-Function Shoe interface. The Canon EOS 90D DSLR Camera does not incorporate the Multi-Function Shoe and is therefore not compatible for use with the DM-E1D Stereo Microphone.

Q: 4. Is this compatible with Canon eos 5d mark2?

A: No, the Canon DM-E1D is not compatible with the EOS 5D Mark II camera. The DM-E1D uses a cable-free and battery-free connection to attach to select Canon cameras equipped with Canon's new Multi-Function Shoe, which is a standard feature on the new EOS R3 Mirrorless Digital Camera. Since the 5D Mark II uses a conventional hot shoe, not the Multi-Function Shoe, you can use the Canon DM-E1 Directional Microphone (B&H # CADME1) which uses a wired connection and it is battery powered.

Q: 5. Will it work with a Sony HDR-CX360V

A: This microphone is only compatible with certain SONY cameras that offer the dedicated SONY Multi-Interface shoe. Your camera features a different and incompatible ACTIVE Interface shoe.

Q: 6. Does this microphone auto adjust the sound level AND does it have the capability to manually adjust without having to do so thru the camera itself?

A: Hi Grady, It depends on the camera. The auto/manual volume level adjustment is a feature of a camera. -Anthony

Q: 7. Does this microphone work with Sony NEX-F3?If not, what microphone can I use with this camera?

A: This camera has no interface/input for this microphone. This microphone is recommended and available: Sony ECM-SST1 Compact Stereo Microphone - B&H # SOECMSST1 ? Mfr # ECMSST1

Q: 8. If i have a uwp wireless transmitter with a lavilier mic ... would this work if i had it off a boom pole with the wireless transmitter. -- or will the signals not work ..?

A: The ECM-674/9X can be used with the UWP beltpack transmitter when powering the mic by battery and using the proper cable ( Sony EC-1.5BX ).

Q: 9. Is there any way to monitor the audio during the recording? On cameras that do not have listen port?

A: This microphone has no headphone monitoring capabilities.

Q: 10. Is this compatible with the XA series of camcorders, specifically the XA40?

A: No, the Canon DM-E1D Stereo Microphone is not compatible for use with the Canon XA40 Professional UHD 4K Camcorder. The XA40 lacks the specific Multi-Function Shoe interface required for operation of the DM-E1D.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Fishman V-300 Concert Series Violin Pickup

$689.85 $945.09

Hp 2-year Pickup And Return Support

$158.85 $212.86

Fishman Tsv Powerbridge Pickup

$989.85 $1,534.27

Hp 3-year Pickup And Return Support

$188.85 $281.39

Hp 3-year Pickup And Return Support

$269.85 $326.52

Boss Gk-5 Divided Electric Guitar Pickup

$749.97 $944.96

Milab 3227 Microphone Shockmount

$385.14 $608.52

Swarovski 15x56 Slc Binoculars

$6,447.00 $9,219.21

Products You May Like

Thingyfy Pinhole Pro X For Sony A

$477.00 $610.56

Tiffen 4 X 6" 1/4 Coral Solid Color Filter

$950.85 $1,397.75