The Whirlwind MCT-7 is a diagnostic cable tester equipped with connectors for analyzing virtually any type of cable combination. The convenient rotary switch allows testing of each conductor within the cable, and can determine the internal wiring configuration.

Diagnostic Cable Tester    Rotary Switch for Testing Each Conductor    NL4, 5-Pin DIN, BNC, and 3-Pin XLR    1/4" and 3.5mm TRS, RCA    Determines Internal Wiring Configuration    LED Indicator Lights

Cable tester with diagnostics for virtually all common connectors and cable combinations

Dedicated LED's for each connector type

Allows testing for Positive Continuity, Cross Wiring, Loose Contact, Open Circuit

Leakage and Short testing includes Leakage Between Wires(up to 10 kOhms), Short Between Wires, and Short To Ground

Related Questions and Answers

Q: 1. Will this work on the SL3?

A: Yes, the Leica RC-SCL6 Remote Release Cable is compatible with the SL3.

Q: 2. How wide is each crossbar? Im to understand that theres a long one and two short ones. Can I use a long and a short? How wide is a long and a short? A short and a short.

A: Each of the 3 crossbars in the Savage Multiple Polevault System telescope from 5.25 to 12.6' in width. As the light stands must be the same width apart for all three crossbars as they are all attached to the same light stands, the width you choose must be the same for all three crossbars. While you may use different size backgrounds on the stand, the width of the setup will be dictated by the widest background you use. You cannot set up the stands in the different configurations you listed above, as the width of the crossbar must be the same for all three crossbars.

Q: 3. Does this also work with SL2S?

A: Yes, the Leica RC-SCL6 works with the Leica SL2S.

Q: 4. Does it come with crossbars already?

A: Yes it does...this ensemble is easy to put together and easy to take apart...the ONLY downside I have with this, is I wish it collapsed to smaller pieces or poles...it takes up a good chunk of room in the garage. Other than that, this pole vault stand is great!

Q: 5. Is the center stud a 1/4-20 thread?

A: Yes, the Avenger C1005 Scissor Clip with Cable Support's center stud is a 1/4 20 thread.

Q: 6. Where does the release plug in?Do you have to have the additional base?

A: This would go into either the microphone or headphone jack on the Leica SL2.

Q: 7. Is this a tether cable? Actually I'm looking for a longer cable to connect my EOS R to the Mac

A: Although the IFC-100U can be used for tethering, a longer cable option to consider is the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange), BH # TECUC15ORG https://bhpho.to/3wo0Z0U

Q: 8. Can you use it with three vinyl drops?

A: I asked Savage Universal about whether it could hold Savage Vinyl 9 x 20 (weighs 29lb). The product description states that it comes with:1 extra long crossbar (70lb max)2 regular crossbars (25lb max each)But they also recommend using sandbags on the stands for safety.

Q: 9. Is there an extension cable that works with the RC-SCL6 remote?

A: The Leica RC-SCL6 Remote Release Cable uses a standard 3.5 mm audio plug. You can use any similar audio cable/extension.

Q: 10. How much weight does it support?

A: It supports up to 70 lbs.