The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 2mm diameter Duramax cable. It terminates to a Switchcraft TA4-F connector for use with Vega wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    Switchcraft TA4-F Connector    Interchangeable Frequency Response Caps    Optimized for General Speaking

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a high sensitivity that is ideal for general speaking applications

Related Questions and Answers

Q: 1. Do all three light stands and heads fit inside the carrying bag all at once?

A: Yes, all three light stands and heads can fit inside the carrying bag at once.

Q: 2. Is this compatible with the PMW-Z150?

A: Here is what Sony says. Multi-Interface (MI) Shoe to connect and control Sonys wireless mic systems or external light (both sold separately) So, I'd say it would certainly work.

Q: 3. dose it work with SONY PXW-Z190?

A: Yes, the ECM-XYST1M microphone does work with the Sony PXW-Z190 camera as both use Sony's multi-interface shoe.

Q: 4. What brand and model number are the light stands currently?

A: Currently the stand in the kit is a Impact 10' https://bhpho.to/34AXFkF.

Q: 5. can I use this with the atem min extreme iso pro hdmi version?

A: The Blackmagic Design ATEM Microphone Converter is only designed to work with the new ATEM Television Studio switchers over the MADI in/out port, which the ATEM Mini Extreme ISO HDMI switcher does not have.

Q: 6. Will this work with a Sony RX100VII?

A: The Sony ECM-XYST1M is not directly compatible with the Sony RX100VII.

Q: 7. Does this mic pass the signal through digitally in cameras that have the later digital MI shoe, or is it only analogue?

A: The ECM-XYST1M sends analog audio to the camera. For digital audio, you can use the ECM-B1M (B&H # SOECMB1M) which has selectable digital or analog output.

Q: 8. will it work with CX550?

A: It comes with a short cable (stereo) that plugs into the Mic out port on the microphone and into a Mic in on your camera. Not sure if the mount (the proprietary Sony mount) fits the hotshoe on the CX550...since I don't have that camera, but if you have the Sony hotshoe mount, it should work.

Q: 9. Does this microphone work with cameras other than Sony's (a Nikon D7100, for example)? Can you physically try them and see if it does?

A: This microphone only works with the Sony cameras that have a Multi-interface shoe.

Q: 10. When mounted on the SONY RX10 via the shoe this microphone disables the manual audio levels. Am I therefore correct in assuming that the RX10 is now recording with auto levels? But when I plug-in the included connecting cable in addition manual levels are once again usable. So when mounted to the shoe, with connecting cable plugged-in is the only way to use manual audio levels with the RX10?SONY offer no explanation as to what's actually happening here!

A: The way the mic works is correct and the only controls if using via the shoe are just what are on the mic itself. To get the other controls from the camera it needs to be attached via the mic jack.