The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is tan and comes with a 1mm diameter cable. It terminates to a 1/8" (3.5mm) Locking Mini connector for use with Sennheiser wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    1/8" (3.5mm) Locking Mini Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. What is the length?

A: The Sennheiser MKH 8060 Moisture-Resistant Short Shotgun Microphone is 5.7" long.

Q: 2. Is this compatible with a Sony FDR AX100 camcorder?

A: Yes, the Sennheiser MKE 400 Camera-Mount Shotgun Microphone is compatible for use with the Sony FDR-AX100 Camcorder.

Q: 3. What is the best xlr cable for using this on the Sony FX3?

A: The Sony FX3 does not come with an XLR input, so you would need an XLR audio handle or adapter. Assuming this is already taken care of, you can use any 3-pin XLR cable with the Sennheiser MKH416. A right-angle cable such as BH #KOM3001.5R would minimize the footprint of your rig, and a low-profile cable such as BH #CACTLPXR10BL would minimize it further.

Q: 4. What is the difference between the first and second generation of this product?

A: The Sennheiser MKE 400 Camera-Mount Shotgun Microphone (2nd Generation), B&H # SEMKE400M, now has upgraded features over the first-generation microphone: Along with its redesigned appearance, the second-generation MKE 400 boasts significant upgrades (listed below) over the original MKE 400 to make it even more effective and versatile: - Swappable 3.5mm TRS and TRRS output cables - 3.5mm headphone port with volume control - 3-stage gain control (the original MKE 400 had two gain positions) - Auto-power function - Integrated wind protection - Furry windshield included for outdoor wind protection - Compatible with Sennheiser's CL 35 USB-C cable (available separately) for direct digital connection to a mobile device's USB Type-C port: B&H # SECL35USBC

Q: 5. is it balanced mic? in both cases - phantom, battery?

A: I think you're asking if has a balanced input? If so, the answer is yes. With its power switch set to off , it takes phantom power from the mic cable. With the power switch set to on , it powers itself from an internal AA battery.

Q: 6. Is there anyway to use this with the Blackmagic Cameras via mini XLR?

A: Yes, you can connect the Sennheiser MKE 400 Shotgun Microphone to the mini-XLR input on Blackmagic cameras using a cable like the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K (B&H # KOMINIPLSBK).

Q: 7. What's the best model of Rycote shock mount for using this mic on a handheld boom? I don't want the heavy pistol-grip one.

A: The Rycote InVision INV-HG mkIII Microphone Suspension - Lyre Shockmount, BH #R YINVHGMKIII , would be a good option for a shockmount for the Sennheiser MH 8060 shotgun mic. this shockmount id lightweight and features a lyre- style suspension, and would connect to a boom pole with a 3/8-inch thread.

Q: 8. Will mic work on a canon r3?

A: Yes, the Sennheiser MKE 400 Camera-Mount Shotgun Microphone (2nd Generation) is compatible via the 3.5mm input on the Canon EOS R3 camera.

Q: 9. How does this turn on and off?

A: From the product page: "The MKE 400's auto-power function uses plug-in power (2 to 10V) from your device to automatically turn it on and off, preventing unnecessary battery drain." In other words it will turn on and off automatically when you turn the camera on and off.

Q: 10. How can I clean it when the sponge particles are sticking to the mic?

A: First of all the last thing you should be using to clean any condenser mic is any liquid and a sponge. You have a 416 a great mic don't ruin it. One of the recommended ways of of cleaning the ports and capsule mesh. Is to get a dry very soft tooth brush. Turn the mic upside down and gently start at the bottom and use the tooth brush to gently rub over the ports and work your way to the top.I find a natural soft Boar bristle tooth brush to be softer than your run of the mill plastic models.There is also a product called Microphome which seems to be garnering approval with the industry.