The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is cocoa and comes with a 2mm diameter Duramax cable. It terminates to a 1/8" (3.5mm) Locking Mini connector for use with Sennheiser wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    1/8" (3.5mm) Locking Mini Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. What is the MKE 400 shotgun microphone origin? Thanks.

A: its a German product , but origin is in Romania.

Q: 2. But when using the Softie will I still be able to use the shock mount? Also, what would be the best possible shock mount and softie to attach the 8060 on a camera.

A: Once the Sennheiser MKH 8060 Moisture-Resistant Short Shotgun Microphone is covered with the Rycote Standard Hole Classic Softie Wind-Screen, there is still a few inches on the end of the mic for a shockmount. An alternative to the Auray DUSM-1 listed in this kit would be BH #RYINVONCAMSM Rycote InVision On-Camera Shockmount for Microphones & Cameras:https://bhpho.to/33wOtmB

Q: 3. is it balanced mic? in both cases - phantom, battery?

A: I think you're asking if has a balanced input? If so, the answer is yes. With its power switch set to off , it takes phantom power from the mic cable. With the power switch set to on , it powers itself from an internal AA battery.

Q: 4. How long is the boom pole in this kit?

A: Minimum Length2.7' (79.0 cm)Maximum Length8.9' (271.3 cm)Weight1.5 lb

Q: 5. CAN THIS MICROPHONE BE CONNECTED TO THE XLR MIXER IN ANY WAY?

A: The Sennheiser MKE 400 Camera-Mount Shotgun Microphone can be connected to an XLR mic input using an adapter such as B&H #ROVXLR.

Q: 6. If i want to use shotgun for VO, which is better. MKH416 or MKH8060? Which is more directional and reject side noise?

A: Both are good, the 416 is more directional, but it can be a bit too drastic in directionality if the subject even rocks around a bit it can be less forgiving, but the 416 will reject more side noise. The 8060 has a higher sensitivity.

Q: 7. How does this turn on and off?

A: From the product page: "The MKE 400's auto-power function uses plug-in power (2 to 10V) from your device to automatically turn it on and off, preventing unnecessary battery drain." In other words it will turn on and off automatically when you turn the camera on and off.

Q: 8. Would I be able to mount this on a mini-tripod and use at my desk for podcasts?

A: Yes, the Sennheiser MKE 400 Camera-Mount Shotgun Microphone (2nd Generation) can be mounted to any mini tripod with a 1/4"-20 thread.

Q: 9. is the moisture resistant on a different version? or is this also labeled as moisture resistant

A: The microphone has a high immunity to humidity and moisture, which makes it suitable for outdoor and indoor projects.

Q: 10. What deadcat fur fits the MKH-416 ?

A: The Sennheiser MKH 416 Shotgun Microphone can be used with deadcat-style furry windshields such as the Rycote 033052 Standard Hole Classic Softie Wind-Screen (B&H # RYS18M), the Auray WSS-2018 Professional Windshield for Shotgun Microphones (B&H # AUWSS2018), or the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics - Extra-Large, Black (B&H # BUBBIWKXL).