The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is cocoa and comes with a 1mm diameter cable. It terminates to a 4-pin Lemo connector for use with Telex wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    4-pin Lemo Connector    Interchangeable Frequency Response Caps    Optimized for Loud Speaking and Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a medium sensitivity that is ideal for loud speaking and vocal applications

Related Questions and Answers

Q: 1. Can the M4 mount to a camera hot shoe with with audio isolation?

A: The Zoom M4 MicTrak Stereo Microphone and Recorder has a 1/4-20 mounting hole, which can be used along with accessories like BH #RESACS14M for shoe mounting.

Q: 2. Will this work on my Fujifilm x4 camera?

A: The Andycine M1 Compact On-Camera Microphone is not compatible with the Fujifilm X-T4 or the X-E4 models because this microphone requires mic plugin power. These Fujifilm cameras do not have mic plugin power for that compatibility.

Q: 3. Does this microphone have the standard protection IP67?

A: No, Rode has not provided an IP rating for the NT-SF1. This microphone is not water-resistant or waterproof.

Q: 4. In a video I saw they said that the mic comes with a pelican-style hard case but I don't see it listed here. Is there a hard case? If yes, what are the dimensions of the case? Thank you

A: The NT-SF1 comes in a full kit, including custom suspension shockmount, blimp-style windshield and furry wind cover. It is all shipped in a beautiful presentation box. A hard Pelican type case is not included.

Q: 5. whats the difference between the Sony ECM 678, now discontinued mic and the new Sony ECM 678/9x shotgun mic?

A: The available documentation from Sony shows identical specifications for both mics. The only mentioned difference would be in the included accessories, with the ECM-678/9x a short XLR cable is provided for connection to the camera.

Q: 6. Is there a Windscreen/ Foam Cover for this?

A: The RODE SoundField NT-SF1 Ambisonic Microphone comes with a furry wind cover included.

Q: 7. how can I add a 50-foot cable to the NT-SF1?

A: I use 2 and 4 channel sub snakes with an XLR fanout at each end, typically 25' in length. Thats usually long enough. to reach a stage box. The fewer separate cables to run, the less to hide or tape down (and roll up).

Q: 8. Can this send separate M and S channels to the sound recorder for decoding later in post?

A: It's decoded inside the mic. All you need is a Y cable 5 pin XLR to two 3 pin XLR's. This is the cable B&H # RECAXSTE you can find it on the B&H website.

Q: 9. what is the Mounting Thread Size? and with which mic tripods is it compatible?

A: The Zoom M4 MicTrak Stereo Microphone and Recorder has a 1/4"-20 socket on the back which is the standard thread size for a tripod mount.

Q: 10. Has the interference issue been fixed?

A: Yes. The issues with RF interference had occurred with the initial production run of the Zoom M2 MicTrak Stereo Microphone and Recorder and has since been resolved.