Rosco Fluorescent Lighting Sleeves/Tube Guards are a very reliable and cost-effective system for easy control of tough lighting scenarios- especially under fluorescents. In addition to the financial benefits of the sleeves, they protect against the potential disaster of glass shattering by containing the lamp within the end caps.

Rosco sleeves are constructed of a solid polycarbonate tube within which is held the specific filter. The choice of filters and combination of filters is endless - there are complete Roscolux, Cinegel or E-Colour color filter lines - something for every venue, every photographer, every cinematographer.

For T12 Lamps    Over 300 Colors Available    UL94HB Rated Polycarbonate    End Caps Protect From Shattered Glass    Easily Trimmed with Scissors

Available in sizes for T12, T8 and T5 fluorescent lamps

The T8 and T5 sizes contain a UV filter that minimizes fading

All standard sizes (2, 4, 5, and 8') are easily trimmed to accommodate any size lamp

Related Questions and Answers

Q: 1. how long is it?

A: This is 15.7".

Q: 2. Hi, I have a Nikon D-3100 and I was wondering if this would work properly with my equipment?

A: Yes, the Vello Manual Extension Tube Set for Nikon F-Mount will work properly with the Nikon D3100, since this camera has the Nikon F mount.

Q: 3. Is this flash tube compatible with QT400IIIM,QT600IIIM,QT1200IIIM ?

A: Yes, the Godox Flash Tube for QT400IIIM, QT600IIIM & QT1200IIIM Flash Heads are compatible with the Godox QT1200IIIM, Godox QT400IIIM, and Godox T600IIIM.

Q: 4. What are the thread sizes on the extension tubes?

A: Unfortunately, the manufacturer does not indicate the thread size of the tubes included in the Vello Manual Extension Tube Set for Nikon F-Mount.

Q: 5. Hi, I'm unclear about the threads thing. Are the threads used or not? Does the thread size matter or not? Please give me a simple direct answer, if possible please. Thanks.

A: I use one of these. Thread size does not matter. The threads allow you to add the tubes together to increase the length of the extension tube. It is best to use a prime lens. For good results you will need to use a tripod and will need a good light source. The depth of field will be very narrow, so you may want to use aperture mode and select a small aperture (i.e. high number).

Q: 6. Can this or other extension sets be used with the Nikon negative/ slide copy unit on the Z 100mm 2.8 mc lens?

A: The Kenko Auto Extension Tube Set for Nikon Z Lenses is compatible with the Nikon NIKKOR Z MC 105mm f/2.8 VR S Macro Lens (Nikon Z). However, if you want to use this with the Nikon ES-1 Slide Copying Adapter, it might not work because the ES-1 is designed to be used with a 60mm lens.

Q: 7. Will this work with a RF to EF mount?

A: The Viltrox Automatic Extension Tube Set for Canon EF will work , but will be Manual Focus .

Q: 8. Can this be attached to the MC-20 teleconverter? i.e. Camera=MC-20=Viltrox = lens

A: I would not recommend using the Viltrox Automatic Extension Tube Set for Micro Four Thirds on the Olympus MC-20 M.Zuiko Digital 2x Teleconverter. The Olympus MC-20 M.Zuiko Digital 2x Teleconverter is designed for use on specific Olympus M.Zuiko telephoto lenses to increase the lens' focal length, whereas the Viltrox extension tubes are designed to increase magnification for close-up photography, but causes you to lose focus at infinity. The two items are not typically used together, and Viltrox has not tested the use of their extension tube with the Olympus teleconverter.

Q: 9. Will this also work with the Cobra 3 monopods?

A: Yes, the iFootage C40 Extension Tube for Cobra 2-Series Monopods will fit the Cobra 3-Series Monopods as well.

Q: 10. Is the Godox FT-QT600IIIM flashtube compatible with the Flashpoint Rapid 600II ?

A: Yes. Same flash tube different branding.