This rugged, gray Lavalier Windjammer from Rycote is designed for use with lavalier microphones worn on the outside of clothing. It reduces wind noise (up to 12 dB) and clothes rustle,and is suitable for interviews or news broadcasts located outdoors in windy conditions.

This Windjammer features an elasticized opening and a foam insert to secure the microphone within it. For maximum wind-noise reduction, the windscreen that was included with your lavalier microphone can be used as well.

For Lavalier Microphones & Lav Mic Foams    Thick Fur Blocks Wind Outdoors    Maximum Wind-Noise Attenuation: 12 dB    News, Documentary, Interview Applications    Reduces Rustling Noises from Clothes    Foam Insert with Rubber Ring    Robust Construction

For use with lavalier microphones worn on the outside of clothing

Reduces clothes rustle and wind noise up to 12 dB

News, documentary, and interview applications in windy conditions outdoors

Robust construction with foam insert and rubber ring

• AKG: C577, CK77, CK97
• Audio-Technica: AT 899
• BeyerDynamic: MCE7
• Countryman: B3, B6, EMW
• DPA: 4060, 4061, 4062, 4071
• Electrovoice: RE90L
• PSC: FPSCNM
• Sanken: COS11
• Sennheiser: MKE 2, ME 102, ME 104
• Shure: SM93, WL50, WL51
• Sonotrim: STR ML+
• Sony: ECM88, ECM77
• Tram: TR50
• Voice Technologies: VT-100, VT-500, VT-506

Related Questions and Answers

Q: 1. i want to mount a stereo pair of DPA 4060. Is there an accessory I need to make this work?

A: Unfortunately the Baby Ball Gag is made for pencil mics or short capsule mics like the Neumann KM 100 or the Schoeps CCM4 LG. There is a stereo boundary kit for the 4060s that has many parts to it. You might want to look at that see below. Perhaps you can fashion something from that. Also the Sanken dual capsule lav might be worth looking into. Here is a dual lav case that may help B&H # ROINVISI10PK. Whatever it is you will have to modify it or build it. Here is a mount that shows promise the Neumann Hanging Stereo Mount. This is the B&H part number B&H # NESTH100.

Q: 2. Which rycote fur windjammer will fit the Sennheiser MZW 60-1 Blimp Windscreen?

A: The Rycote and Sennheiser blimps are very similar, yet they are not identical. Part of the issue is where the pistol grips line up on these blimps, and the opening on the fur windjammers factors in the position of each pistol grip. There are no guarantees Rycote and Sennheiser are interchangeable, but a Rycote equivalent to the MZW 60-1 would be the Windjammer #4 (B&H#RYWJ4).

Q: 3. what is the total length of the windjammer, I'm trying to fit it to my old rycote which is appproximately 420 mm long ?

A: The Rycote Windjammer #3 has a length of 430mm with a height of 125mm. This is designed to work with Rycote's WS3 windshield which has a total length of 370mm with end caps installed.

Q: 4. Would this work on the Zoom H6?

A: Yes.

Q: 5. Will this end cap fit on the Rycote Windshield #4? They don't sell the individual replacement caps so I'm looking for a cheaper option.

A: The Rycote Baby Ball Gag Windshield will not work as replacement end cap for the Rycote windshield kit #4. You will require Rycote MFR # 018501. It is a replacement part (Mono Modular Windshield End Cap) sold at cost through their parts store.

Q: 6. For Sennheiser Ambeo VR, which BBG windshield of Rycote should I buy? Thank you.

A: The Rycote BBG Windshield 011003 (BH #RYBBG25) is directly compatible with the Sennheiser Ambeo VR microphone.

Q: 7. Is it compatible with sennheiser ambeo mic

A: Yes this will fit the Sennheiser Ambeo VR 3D microphone no problem

Q: 8. It van be attached to a Sony MS2 Microphone?

A: This Rycote Baby Ball Gag is designed to fit microphones with a shank diameter of 25mm. The Sony ECM-MS2 microphone has a 24mm diameter and it is 137mm long. The length is similar to the Sennheiser mics that are compatible, so it may work for the ECM-MS2. You may need to add another grommet or a little bit of padding for a tighter fit around the mic since the ECM-MS2 is 1mm thinner. We have not tested the Rycote BBG Windshield with the Sony mic to confirm that it will fit, but based on the dimensions, it may work.

Q: 9. Is ti possible to use this with a Sony MS 2 microphone?

A: No. the diameters do not match: Sony MS 2: Dimensions 0.96 x 5.5" (24 x 137 mm) Rycote 011001 Specs Compatible Mic Diameter 0.79" / 20 mm This Rycote : https://www.bhphotovideo.com/c/product/745941-REG/Rycote_011007_Baby_Ball_Gag_Windshield.html/specs will work: Rycote 011007 Specs Compatible Mic Diameter 0.8" / 21 mm

Q: 10. will this fit the Sennheiser 8050?

A: Rycote does not list the 8050 as a compatible microphone.