The Da-Lite 24812V Da-Snap Fixed Frame Screen can be mounted on the wall or in a wall opening. It has a viewing area of 81.5 x 192" for an aspect ratio of 2.35:1 and 208" diagonal.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification.

The surface has black backing to prevent light bleed-through. Reinforced black binding on all four sides attaches the surface to the frame with metal snaps. The snaps and binding are concealed by the frame, made of 1.5" square, matte black, powder-coated aluminum. The frame is slip-jointed at corners and joints. Standard wall-mounting brackets are included.Pro-Trim fabric is wrapped around the frame, absorbing excess light coming from the projector.

208" Diagonal    2.35:1 Cinemascope Format    HD Progressive 1.3 Front Surface    1.3 Gain / 150° Viewing Angle    Black Backing Retains Brightness    1.5" Square Aluminum Frame    Pro-Trim Cloth on Frame

Related Questions and Answers

Q: 1. Hi, will this convert my MF lenses to AF lenses? I understand the older Pentax SMC-F 1.7x will allow me to AF my manual lenses? Thanks for your time and advice!

A: No it does not. Only the older Pentax-F 1.7x does that. It was designed to work with Pentax-A manual focus lenses as a transition to auto-focus. No other TC I know of does that.

Q: 2. Is the focal length transmitted to the camera corrected? For example, if used with a 200mm, is the combination 200mm + 1.4x converter transmitting the info 'focal length = 280mm' to the camera? (Important for stabilization)

A: It does register if you use it with a Pentax lens. It shows 420mm with my DA*300mm F4 and 140mm with my Pentax 100mm WR. Not sure about the rest. Probably so if you you a fast lens. Dont know about non Pentax lenses.

Q: 3. I own a Pentax K20D dSLR. How is this Pentax 1.4x teleconverter better than the Tamron 1.4x teleconverter I already own for this (older) camera?

A: I don't know anything about the Tamron 1.4x, but I too had an earlier 1.4x for which I paid $99. I forget the brand off the top of my head. In comparison, the Pentax is vastly superior (with my K-3; I'm not sure about how well it will work with a K20D). The picture quality is superb (while the cheaper device produced images that were no better than what Photoshop could do in post-processing). The in-lens auto-focus is supported in both my Pentax 300 and Sigma 150-500 and it works well and quickly with both. It does not work so well with my Sigma 18-250 lens (tends to overshoot and flip back and forth while trying to focus -- this can be overcome by using Live View). Also, with the Pentax lens, but not the Sigmas, the presence of the teleconverter is detected and included in the metadata, so, for example, the 300mm lens is shown as shooting at 420mm.

Q: 4. Does anyone know if the t-handle on the corners are 3-8th/16 or 5-16th/18 ?

A: The following unit feature 3/8th handles.

Q: 5. Does the Pentax 1.4x HD Converter work with the K-1 Camera? If so, does it work using FA (full-frame) lenses under the camera's full-frame mode?

A: Yes, the Pentax 1.4x HD PENTAX-DA AF Rear Converter AW for K-Mount Lenses will work with the K-1 camera, and with Pentax FA "full frame " lenses. It is important to connect the converter to the lens first, then attach the lens to the camera .

Q: 6. What is tube lengt of sections?

A: Each section is approximately 6 feet long, two on each side.

Q: 7. how come it says for 8x8 frame. and the same corners and the baby pin ear on their descriptions it says made for maximum 6x6 frame. can t we just use any frame we want if we have corners and ears isnt that the point of it?

A: The corners and the ears are all the same just the poles are longer.

Q: 8. If I hook this up to my vocopro jamcube will I be able to change the key on my music both for CD+G and BT streamed music? Or will only change the Key for CD's?

A: The VocoPro DA-2200 Pro Six-Microphone Karaoke Mixer is a simple microphone mixer and CD+G karaoke player router. So any key changes would have to be done by your vocopro jamcube.

Q: 9. the snap apart pieces are 6 ft long? this cant make a 8x8 frame correct?

A: Unfortunately, this Matthews 12 x 12 Snap-A-Part Frame cannot build into an 8 x 8 frame with the includes sections.

Q: 10. Is this item New ?

A: Yes the VocoPro DA-1000 Pro is new.