The Panasonic TH-55LFV50U 3x3 Video Wall Bundle is designed to be an all-in-one solution to your video wall needs. It includes nine Panasonic TH-55LFV50U displays and wall mounts; a keyboard and mouse; IR, serial, and DVI cables; and an overfame kit. The included serial and IR cables will offer control of all of the displays at once by daisy-chaining them together, while the included DVI cables will allow your video signal to also be daisy-chained through all of the displays, simplifying your setup process. Lastly, the included overframe kit provides additional uniformity to your installation.

The Multi-Display function enlarges images up to five times their original size, both vertically and horizontally. It enlarges images by the same zoom ratio in both directions or by different ratios in order to effectively use vertically or horizontally elongated spaces. LCD display versatility can be further enhanced by freely selecting the zoom ratio to match the installation space.

The narrow bezel results in joints that are only 0.21" (5.3mm) wide for video wall installations, enhancing the impact of displayed images.

Colors are pre-calibrated prior to factory shipment to minimize the color differences between displays for multi-screen use.

The terminal board for the TH-55LFV50U is equipped with DVI-I and serial output terminals. DVI video signals for up to 10 displays and serial signals for up to 25 displays can be transmitted by a daisy-chain connection. This enables your video wall to be configured using only displays and video sources with no need for a video splitter, signal booster, or other device. Using an optional Remote Control Kit, up to 25 displays can be operated by a single remote control.

Related Questions and Answers

Q: 1. I have the Canon Mark 5DIII and the Canon 430 EX II flash. If I buy one Flex TT5 will I be able to fire the flash off camera? Would one work if later I wanted to fire two flashes, one on camera (attached to the Flex) and one off camera?I am wondering if I need any other products to make off camera flash work with the Flex TT5.Thank you! Michelle

A: In order to work with the PocketWizard system you'll need at least two units, one on your camera and one on your off camera flash. The unit connected to your flash off camera will have to be the Flex TT5, the unit on your camera could either be another Flex TT5 or the smaller Mini TT1 (which is a transmitter only). You can always add more flashes into this system later on.

Q: 2. Hi, Can PocketWizard FlexTTL can be used with non-Nikon flashes. I have One Nikon SB 800 and some other non-nikon TTL flashes. Will I be able to use this system with both Nikon and Non-Nikon TTL flashes? Thanks

A: Sorry. I do not know. I only have Nikon flashes. Good luck.

Q: 3. Will this work with the 430EX II flash?

A: Yes, the PocketWizard FlexTT5 and MiniTT1 for Canon radio triggers included in the above kit would be compatible for use with the Canon 430EX II Speedlite Flash.

Q: 4. I have a Sekonic L-758DRlight meter. Can I use the Sekonic to send a signal to the Pocket Wizzard FlexTT5 and trigger my Canon ST-E3-RT Speedlite Transmitter that will in turn trigger my Canon 600EX RT.The Sekonic has the Pocket Wizzard radio.Please advise

A: Yes, accpording to PocketWizard that will work.

Q: 5. What's In the Box?

A: The LG VL5FAW 2x2 55" Video Wall with Peerless Mount Bundle BH #LG55VL5FAW4P • MFR #55VL5FAW-4P includes 4 x LG VL5FAW monitors and 4 x Peerless Video Wall Mounts: VESA 600 x 400 mm

Q: 6. Is this compatible with the Canon 5D Mark IV?

A: I'm using 5D III. I don't know about the new one.

Q: 7. Which model of peerless mounts are included with 3x3 LG VL5FAW?

A: The LG VL5FAW 3x3 55" Video Wall with Peerless Mount Bundle BH #LG55VL5FAW9P includes 9 unspecified model Peerless-AV wall mounts.

Q: 8. could two of these set ups make for a wider screen?

A: The Philips X-Line BDL2005X 49" Full HD Video Wall Display BH #PH49BDL2005X bundle could be combined with another bundle to make a wider display. Tiling mode: Connect two or more Philips professional displays to create a tiled videowall—without the need for external devices. A single player takes care of content, whether you have four screens or 40. 4K content is fully supported, and if you’re showing that content on four screens you get the best possible dot-by-dot resolution.

Q: 9. I am using flextt5 and need to synch with LiteTrek 4.0 DC Monolight . What synch cable do I use? I could guess but don't want to do trial and error approach.

A: You would need a mini to mini sync cable (B&H # IMMMMM16)

Q: 10. I've two walls consisting of (16) of these. Is there a 'signal sensing' setting for auto power on?

A: The 49BDL2005X does not appear to have auto power-on functions. But power on-off may be programmed via the RS232 or RJ45 interfaces.