Hum eliminators work best when interference causes small differences in ground potential (less than 20 VDC) or long cable runs have induced currents. HEC series units also work well when there are multiple power panels in a building that create differences in ground potential which induce ground loop current flow and 60 Hz hum.

The 2000 series of hum eliminators increase the attenuation at the power frequency (50 Hz or 60 Hz) when induced currents are high, therefore reducing hum.

When a small amount of hum remains after one HEC has been installed, another unit can be added without significant signal degradation.

Multiple Input and Output allow for use in component video applications or multiple video line use. Featuring 70 db isolation between channels.

Related Questions and Answers

Q: 1. In response to: Hello Marc, the answer varies because it depends on which Atomos unit you use, it can be from 5.6 - 14.6v. the DC side is 2.5mm. I apologize for leaving that out. I assumed this one only fit the Ninja V but I guess it can be used on others as well. I have the Ninja V and I am hoping to use this battery eliminator along with a cable to connect to either the DJI Ronin S, OR, a battery plate with DC 12v barrel connector output. Are both of these options available and safe or which one is possible? My goald is to reduce the weight of batteries on my gimbal using both NinjaV and Canon EOS R. Thank you!

A: This product is designed to power the Atomos Monitor only and requires the Atomos Locking AC Power Adaptor, BH #ATOMPWR012. We are not aware of a way to connect this to the power output from a Ronin-S or a battery plate.

Q: 2. I'd like to rephrase my previous question - If I have a something like a Tilta battery plate with a 12v& 8v output barrel connectors, could I use the 12v output port to connect a male to male barrel cable to this Atomos battery eliminator? Or would I have to use a special cable to screw into the Atomos plate? Also, what are the minimum power requirements? Thank you

A: Response to answer - I apologize for leaving that out. I assumed this one only fit the Ninja V but I guess it can be used on others as well. I have the Ninja V and I am hoping to use this battery eliminator along with a cable to connect to either the DJI Ronin S, OR, a battery plate with DC 12v barrel connector output.

Q: 3. Will this work with the Ninja Flame? (Assuming I also get the required power cable)

A: Yes, the Atomos AtomX Sony L-Series Type Battery Eliminator is compatible with the Ninja Flame.

Q: 4. Does this battery eliminator work with the Shinobi 5.2 inch monitor? I understand I need to purchase an additional cable

A: The Atomos AtomX Sony L-Series Type Battery Eliminator (B&H# ATOMDCA001) may be used as part of the powering solution for an Atomos Shinobi 5" 4K HDMI Monitor (B&H# ATSHIN). See below: https://www.bhphotovideo.com/c/product/1456145-REG/atomos_atomshbh01_shinobi_5_2_4k_hdmi.html/

Q: 5. does this comes with ATOMOS SHINOBI monitor? if not, will it work? i want to power the monitor with d tap

A: Hello Mateo, this does NOT come with the Shinobi as it has a Dummy to AC already. if you are trying to power via tap, you'll need to get this AtomX Battery eliminator.

Q: 6. Is it possible to connect this to a Tilta battery Plate with a 7.4 V output & use it to power a Shinobi 7?

A: The Atomos AtomX Sony L-Series Type Battery Eliminator requires the correct cable for power. If your Tilta plate has a d-tap with 7.4 VDC you can use this: Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2

Q: 7. I already have a AC/DC adapter that plugs into my Atomos Fast Charger for NP-F Batteries. Will that adapter work to power this Atomos Battery Eliminator? Thank you.

A: The Atomos AtomX Sony L-Series Type Battery Eliminator correct works with this Atomos Locking AC Power Adapter for powering the Ninja https://bhpho.to/39dxCrw

Q: 8. Will this work with the SmallHD Focus 7 monitor?

A: Yes, but I would recommend B&H # SMCDCSONYLUS instead.

Q: 9. What is the DC output for this device? Is it a pass through, or a voltage regulator? If I input 12v will 12v pass through?

A: The Atomos AtomX Sony L-Series Type Battery Eliminator will output the standard L-Series voltage of 7.3V when input with a compatible voltage between 6.2-16.8V.

Q: 10. Can I connect a regular 2.5mm dc power cable to this?

A: You cannot. This requires the separately available Atomos Locking AC Power Adapter, #ATOMPWR012. https://bhpho.to/38ivBnE