Server 42U Rack

Azden Fmx-42u 4-channel Microphone Field Mixer With Usb Digital Audio Output

Product Code: ga21346
Availability: In Stock

$1,647.00 $2,272.86

Qty

6 reviews Write a review

Description
Reviews (6)

The Azden FMX-42u is a portable 4-channel audio mixer with built-in A/D conversion and audio output via mini-USB for connection to smartphones, tablets, and computers. It is designed for professional and semi-professional field audio capturing.

The FMX-42u also features 4 balanced 3-pin XLR microphone inputs with individually switched +48V phantom power. A pair of balanced XLR outputs provide line or mic level (switchable) signal to cameras, recorders, etc. Additional features include a switchable input limiter to reduce the possibility of overload distortion, Left/Center/Right pan switches on all input channels, and enhanced circuitry for improved signal-to-noise ratio. The FMX-42u can be powered either by 6 AA batteries or an optional 12 VDC external power supply. A ballistic nylon carrying case is included.

The FMX-42u is an affordable field mixing solution for event videos, ENG/EFP applications, documentaries, and more.

4 XLR Inputs Phantom Power Input Limiter 2 Balanced Mic/Line XLR Outputs Make Backup Recordings Using USB Output Record to Smartphone, Tablet or Computer

Input
Balanced Input	4 x XLR 3-pin female (CH 1, 2, 3 & 4)
Level	Line- Standard: +4 dBu (electronically balanced) Maximum: > +26 dBu Impedance: 20 kOhms MIC HI- Standard: -38 dBu (electronically balanced) Maximum: +4 dBu Impedance: 2 kOhms MIC LO- Standard: -58 dBu (electronically balanced) Maximum: -15 dBu Impedance: 2 kOhms
High Pass Filter	100 Hz - 6 dB/oct
Input Level	-20 to +19 dBu (unbalanced)
Impedance	11 kOhms
Return Input	No
Output
Balanced Output	2 x XLR 3-pin male (output L & R)
Unbalanced Outputs	1/8" / 3.5 mm stereo mini-jack
Monitor Output	1/4" / 6.3 mm stereo jack
Balanced Output Level	LINE- Standard: +4 dBu (electronically balanced, 5 kOhms load) Maximum: +20 dBu (electronically balanced, 5 kOhms load) Impedance: 600 ohms MIC- Standard: -36 dBu (electronically balanced, 5 kOhms load) Maximum: -20 dBu (electronically balanced, 5 kOhms load) Impedance: 600 ohms
Unbalanced Output Level	Standard: -36 dBu (electronically balanced, 2 kOhms load) Maximum: -20 dBu (electronically balanced, 2 kOhms load) Impedance: 120 ohms
Monitor Output	Max Output: +1 dBu (32 Ohm load at 9 V), 16 - 100 Ohm load recommended
Meters	Standard Output Level: 0 VU (+4 dBu)
Digital Output	Connector: USB mini-B (female) Interface Format: USB 2.0 full speed Audio Data Format: Isochronous data format Sampling Frequencies: 16 / 22.05 / 32 / 44.1 / 48 kHz compatible Bit Depth: 8 / 16-bit compatible Channels: 2 Device Name: USB AUDIO CODEC
General
Frequency Response	Balanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB) Monitor Output: 30 Hz - 30 kHz (+0/-2 dB)
Signal-to-Noise Ratio	Balanced Output: -120 dBu (A weighted, input equivalent level)
THD	Balanced Output: < 0.005% @ 1 kHz (at LINE position +19 dBu output)
Phantom Power	48 V (±1.5 V)
Sample Frequency	1 kHz
Battery Requirement	6 x alkaline AA
Current Drain	Not Specified By Manufacturer
External Power	10.5 ~ 17 VDC @ 200 mA
Dimensions	9.0 x 6.5 x 2.3" / 220 x 160 x 56 mm (without protrusions)
Weight	2.9 lb / 1.3 kg (without batteries)
Packaging Info
Package Weight	3.85 lb
Box Dimensions (LxWxH)	10.4 x 6.7 x 3.7"

On-board A/D converter and 2-channel mini-USB digital audio output
Mini-USB output connects to computer, smartphone, or tablet
Simultaneous use of both outputs allows the analog signal to be sent to the camera while a backup digital signal can be sent to a smartphone or tablet or computer via mini-USB
4 balanced XLR line/mic inputs and pan controls
Switchable 48V phantom power and limiting
Professional-quality VU meters
2 balanced XLR outputs (line/mic switchable)
Stereo mini-jack output for DV cameras
6 x AA battery powered
Optional A/C adapter (sold separately)

Related Questions and Answers

Q: 1. What app do I need on my iPhone with this? Does it interface with GarageBand?

A: The Saramonic SmartRig+ can be used with GarageBand or any recording app that is compatible with your iPhone. The SmartRig+ is simply an audio interface that provides a way to connect an instrument or microphone with your iPhone.

Q: 2. What type of mic inputs does this unit have? Does it offer phantom power for microphones?

A: The Azden FMX field mixer has 4 XLR inputs with phantom power along with 2 balanced Mic/Line XLR Outputs. And 1 USB output.

Q: 3. Is hdphn out amplified at all? ? Can it monitor audio from the mic on a camera with no headphone out?

A: Yes, the Saramonic SmartRig+ 2-Channel XLR Microphone Audio Mixer features an amplified headphone output which can be used to monitor audio in real time.

Q: 4. How long is battery life with this unit?

A: The battery life on the Saramonic SmartRig+ varies greatly, and is heavily dependent on the devices being plugged into it. You can get anything from a couple of hours to even 20+. Microphones (dynamics, ribbons, condensers, wireless) have different needs and will therefore draw different amounts of power. It is best to be prepared with extra 9v batteries should the need for one arises.

Q: 5. Will this work with a Lightning adapter for iPhone?

A: Yes this will work with a Lightning adapter into any iPhone, I've done it multiple times in the past. This is the adapter bellow if you need a new one. https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html?sts=pi&pim=Y

Q: 6. Does it work with rechargeable batteries?

A: I'm sure it would.

Q: 7. Is this still supported by Saramonic? I can't find the manual or the unit on the Saramonic website.

A: Yes, A user manual can be located using the following link https://www.bhphotovideo.com/c/product/1443713-REG/saramonic_smartrig_uc_two_channel_audio_interface_for.html

Q: 8. Will this case also fit the Azden FMX-32? The specific case for that one is not available at the moment.

A: This case will easily fit the smaller AZDEN FMX-32 microphone mixer.

Q: 9. Will this allow me to use wireless Sennheiser mics with Facebook live streams from my iPad?

A: It worked for me using multiple mics on a Youtube live plugged into headphone jack so I believe it will work gor your setup

Q: 10. Will this fit the Tascam DR-70D?

A: Just based on the dimensions in the product's specs, yes it should physically fit inside the FMX-42C case. However, I cannot tell you how well you will be able to access inputs, outputs and controls. This case is specifically designed for the Azden FMX-42a and FMX-42u mixers.

Omar	13/09/2024
Do not use any type of batteries other than AA Alkalines or things can distort. This is a top quality mixer, you can't go wrong. 5

John	26/08/2024
Very nice, low cost mixer. I replaced a Shure FP32 with this new Azden and I'm very happy. The only weird thing is having to take it apart to flip the dip switch to set the VU meters to work with line output vs. mic output. 5

Stephen	21/08/2024
I used this mixer for the better part of a season on an ocean focused natural history show. Complete run and gun. Its packed with features. No rust from salt water spray (yet). It's been banged up from a lot of travel (always in a checked in pelican) and didn't miss a beat. Just recently (season 2) another sound guy on the show somehow broke the headphone monitoring jack by jamming in the monitoring volume knob, so it isnt invincible, but it can take a beating. For the price, nothing I know of comes close. It's like the 5D MKII of the sound world. Comes with a little bag, which is handy but you'll either want to get a pro bag for it (Porta Brace makes one), or Velcro an extra pouch onto it to make it usable. 5

NickMDal	07/05/2024
I shoot wildlife video and take this in my pack or in the back on the back of a mountain bike. I mix a lav with a stereo ambient mics. The sound is as absolutely clean. The controls are a breeze. It is light and perfectly counterbalances a Canon XA20 on the tripod. Ignore people complaining that this brand is not linked with high end audio. For the price, it is magnificent. I love it! 5

Gabe	04/05/2024
The Azden FMX-32a is my second Azden mixer. I own, and still use, the earlier, 32 version. As a professional videographer, I shoot videos that often require more than one microphone. An example of these include dance recitals, wedding ceremonies, question and answer lectures, and town and city counsel meetings - to name a few. It goes without saying that wireless microphones are the norm in these situations. The Azden-32a has 3 XLR mic inputs that allow you to control the level of each mic. Output from each input can be assigned to either a Left or right channel by little switches below the level controls. Individual Limiters can be turned On or Off to protect against in-the-red-zone output. While the Azden FMX-32a does provide a headphone input for monitoring the audio, I use the mic input on my video camera to monitor my audio. Output levels are monitored by green, yellow, and red lights The power for the Azden is provided by an easily-accessed little compartment on the top of the mixer and utilizes 6 double A batteries. Electrical power is also possible with the purchase of an additional DC adapter. Dimensions of the unit - Length: 6 1/2 Width 3 1/2 Height: 2, In addition to its superb features, the construction of the Azden. Is top notch quality. And lastly, what I absolutely love about this little guy is how I am able to attach it to my video camera. Keep in mind that I am not using the Azden attached to my video camera in a walk-around shoot. I am attaching it to my camera that is attached to a tri-pod that is attached to wheels (for mobility). How do I attach it to my camera? I purchased a K-Tek Shoe Mount plate. I Attached the plate to the bottom of the Azden FMX-32a with heavy duty Velcro. My mic receivers are attached to a thin wooden plate with Velcro. If you are shooting a job in which you require the ability to use multiple, check out the Azden FMX-32a. 5

Chris	15/04/2024
I labored over the purchase of this mixer. As a freelance videographer, I need a decent quality mixer but I have to spend my pennies wisely. I came within a hair of getting the tried and true Sound Devices 302 but I took a big chance and decided to get the Azden at 1/3 the price. The build of this mixer is excellent and the sound quality has been great for my needs. I do a lot of corporate and industrial video as well as some indie work where margins are really tight, but the FMX-42u has delivered the sound I need for my purposes. If you need a solid mixer that will get the job done and don't require top tier gear to impress your producer, give this mixer a try. 5