Novoflex Neiger 19p Ball Head
- Product Code: ga213540
-
With the NEIGER 19P Ball Head Novoflex offers a small, extremely firm grasp. Features include a removeable flash shoe mounted on a 1/4"-20 screw, and a panning base for panoramas.
Open Box Products Have a Limited 1-Year Manufacturer Warranty Supports 6.6 lb, Flash Shoe Panning Base for Panorama
Key Specs | |
---|---|
Camera Mounting Screw | 1x 1/4"-20 Male |
Head Type | Ball Head |
Load Capacity | 6.6 lb / 3 kg |
Weight | 4.16 oz / 118 g |
Camera Attachment | |
Camera Mounting Screw | 1x 1/4"-20 Male |
Head | |
Head Type | Ball Head |
Base Mount | Flat Base with 3/8"-16 Female |
Counter Balance | No |
Pan & Tilt | |
Independent Pan Lock | Yes |
Vertical Tilt | No |
Lateral Tilt | No |
General | |
Load Capacity | 6.6 lb / 3 kg |
Weight | 4.16 oz / 118 g |
Packaging Info | |
Package Weight | 0.3 lb |
Box Dimensions (LxWxH) | 7.25 x 3.6 x 1.45" |
Related Questions and Answers
Q: 1. Will this head work with canon r7 and canon 500 f/4 mk l. Lens is around 8 lbs
A: The Sirui K-10x Ball Head has a payload capacity of 44lb, which should support the combined weight of the Canon EOS R7 Mirrorless Camera (B&H # CAER7) and the Canon EF 500mm f/4L IS (Image Stabilizer) USM Lens (B&H # CA5004LISEF) with the Canon Control Ring Mount Adapter EF-EOS R (B&H # CAMAEFRFCR). It's important to adapt this system with sturdy tripod legs as well.
Q: 2. Where can I buy extra backup flash shoes if they break?
A: The ones B&H carry that can work are, https://bhpho.to/34Ei9eD https://bhpho.to/3icO4uz https://bhpho.to/2SS6ZQR
Q: 3. Will this head support an X-H2 + XF100-400 without sagging?
A: The load capacity for the Novoflex ClassicBall 2 Ball Head, B&H #NOVOCB2, is 11 lb / 5 kg. It should support the weight of the FUJIFILM X-H2 Mirrorless Camera and the FUJIFILM XF 100-400mm f/4.5-5.6 R LM OIS WR Lens as they are 5 lb combined.
Q: 4. Is there a D ring on the underneath of the mounting plate, or is it a vice or screw?
A: The TY-50X mounting plate has an attachment screw with a D ring, screw driver slot and a hex opening for a 5/32 allen wrench.
Q: 5. Does this have a bubble level built in?
A: Unfortunately, the Novoflex MBAL-PRO75 would lack a bubble level.
Q: 6. Will this fit on Vangurad Veo 2 235CB tripod?
A: As the head on the Vanguard VEO 2 235CB Carbon Fiber Tripod is replaceable and uses a standard 3/8 -16 male tripod screw, yes, you may connect the Induro BHD2 Ball Head, B&H # INBALLHD2, to the center column on the tripod. However, do note that due to the design of the tripod that has the legs fold over the head in its closed position for storage purposes, the Induro BHD2 Ball Head may not allow the tripod legs to close completely. While we cannot test this combination for you, the head would fit, though you should be aware of the above caveat.
Q: 7. Is this compatible with the Induro Gimbal Head GHBA?
A: Yes, this would be compatible with the GHBA.
Q: 8. Is the KX-40x compatible with Kirk Arca style mounting plates?
A: Yes, it does. The standard is Arca, so it doesn't matter if the manufacturer is Kirk, RRS, etc. If the mounting plates are Arca compatible, it will work with the KX-40x ball head.
Q: 9. how do I attach my camera to this tripod?
A: You must first remove the head on your current tripod. Replace by screwing on your SIRUI head. Screw the ACRA SWISS plate to the bottom of your camera and place the combination on the head.
Q: 10. Is this ball head too big to have a tripod (in particular the sirui w-2204) reverse fold its legs around it?
A: I don't have the tripod that you mention in particular, but I have a similar, the Feisol CT-3442 Tournament Rapid, and the legs are able to reverse fold down, and the whole setup fits into the carrying bag.
Top Bestselling Products
Lenscoat Gimbal Pouch (realtree Ap Snow)
$93.00 $128.34
Lenscoat Gimbal Pouch (forest Green)
$58.50 $87.75
Black Box Emerald Single-head Dvi Kvm Over Ip Extender Transmitter
$2,984.85 $3,790.76
Vixen Optics Head-worn Binocular Magnifier Loupe
$179.85 $287.76
Matthews Bh-30 Ball Head
$659.85 $930.39
Neewer Gm28 Panoramic Ball Head (red)
$89.97 $107.96
Digitalfoto Solution Limited C-clamp & Ball Head Magic Grip
$104.97 $143.81
Vinten Vector 750i Pan And Tilt Head With Vri Box
$108,841.50 $148,024.44
Panasonic Ty-wk85pv12 Wall Hanging Bracket
$5,500.20 $6,875.25
Manfrotto 234rc Tilt Head For Monopods, With Quick Release
$194.64 $235.51
Mcs Box Frame - 8x10"
$9.66 $11.59
Kupo Front Box Bracket
$221.85 $343.87
Skaarhoj Tally Box + 5 X Tally Lights Bundle
$5,279.64 $7,444.29
Kupo Apple Box (half, 20 X 12 X 4")
$131.85 $175.36
Flashback One35 Camera (orange)
$297.00 $409.86
Products You May Like
Billingham 200 Superflex Padded Base (orange)
$108.00 $168.48
Hoya Variable Density Ii Nd Filter (62mm, 1.5 To 9-stop )
$359.97 $536.36
Wd My Cloud Pro Series 8tb Pr4100 4-bay Nas Server (4 X 2tb)
$2,549.97 $3,850.45
Brother Pabu001 Li-ion Rechargeable Battery
$268.11 $337.82
Photo Clam Pcfc200 Lens Foot For Canon Ef 200mm F/2l Is Usm Lens
$435.00 $687.30
K&m 29376 Microphone Table Base (black)
$497.97 $627.44
Urth Naos Sleeve For 13/14" Laptop (moss)
$177.00 $228.33
Neumann M-212 C Boom Mount
$659.85 $1,055.76
Bushnell 10x42 Powerview 2 Binoculars
$177.00 $240.72
Radial Engineering Dragster - Load Correction Device
$209.97 $268.76