The Marshall V-4302 is one of the 4300 series of custom-mount glass lenses designed for industrial applications. It comes with the 12mm micro mount thread which can fit board cameras and some bullet cameras. This is a high-quality lens that incorporates six glass elements. It has a fast f/1.8 aperture for less than perfectly lit scenes. In addition, the lens is ultra-wide and it has a MOD of about one foot.

The V-4302 was designed for top-quality images in unconventional industrial situations. Robotics, machine vision, and other purely custom uses can benefit from its features. As a 2.9 mm lens its angle of view is 74° wide. It has a minimum object distance of about 15 inches or 400 mm. A range of semi-custom mounting solutions are available for certain manufacturer's board cameras and imaging sensors.

Related Questions and Answers

Q: 1. Will this unit convert 720p SDI in to 1080i SDI out?

A: Yes -- just tested it with 720p from my laptop, converting to 1080i on an HD monitor. This uses the scaler function.

Q: 2. Hello, I’m using (2) Sony FS7 cameras and would like to convert them from 23.98 PSF to 1080i. Would I need 2 units?

A: Yes, two individual DECIMATOR MD-Cross V2 Miniature HDMI/SDI Cross Converters would be required to handle more than one signal at a time. If it was one signal and you split the output, this would only require one.

Q: 3. Do I need a special cable to connect the NanoLockit Miniature to a Sony FX9 camera?

A: Yes, you will need the Ambient Recording LTC-OUT Lockit Time Code Out to BNC / L5P-BNC(BH #AMLTCOUT) to connect the Ambient Recording NanoLockit Miniature Timecode Synchronizer with Logging Feature to your FX9.

Q: 4. Can this be a bidirectional converter like the DECIMATOR MD-LX HDMI/SDI?

A: Hi There, this is Jules from Symbiosis, Decimator's Master Distributor. The MD-Cross v2 can be used as a simultaneous bi-directional SDI to HDMI and HDMI to SDI converter. It can scale/cross-convert in one of these channels. It can also be configured as a distribution amplifier from HDMI or SDI to 1x HDMI and 4x SDI outputs with or without cross conversion/scaling as well as also being able to overlay graticules, UMD and in-picture audio meters. It can also be used as a test pattern generator. I hope this helps. Jules

Q: 5. Can convert 1080p to 1080i ?

A: Yes, you can convert from 1080p to 1080i with this unit.

Q: 6. Can this take 3 sdi inputs and put hdmi 1 as multiview and hdmi 2-4 as crossover?

A: The Decimator MD-Cross V2 only has one 3G-SDI and one HDMI input. For outputs, the MD-Cross V2 has one HDMI, and three 3G-SDI outputs with one of the three being an Active-loop through.

Q: 7. Can this scale a 1080i HD-SDI input to a 720p HD-SDI output?

A: Yes it can. It does cause some quality degradation, but it does well for the price point.

Q: 8. how long is the cable in relax position?

A: the cable length has not been provided by LanParte

Q: 9. Can this unit convert 1080p 23.98 to 480i?

A: HD 1920x1080p23.98 is a supported input, but 480i is not a supported output. The lowest output signal supported is SD 720x487i59.94

Q: 10. Can this device take in a 4k HDMI single and output it to 1080p HDMI. All the while looping out the original 4k HDMI signal to SDI 4k?

A: The DECIMATOR MD-Cross V2 Miniature HDMI/SDI Cross Converter does not support 4K and cannot output a 4K SDI signal.