Rosco Fluorescent Lighting Sleeves/Tube Guards are a very reliable and cost-effective system for easy control of tough lighting scenarios- especially under fluorescents. In addition to the financial benefits of the sleeves, they protect against the potential disaster of glass shattering by containing the lamp within the end caps.

Rosco sleeves are constructed of a solid polycarbonate tube within which is held the specific filter. The choice of filters and combination of filters is endless - there are complete Roscolux, Cinegel or E-Colour color filter lines - something for every venue, every photographer, every cinematographer.

For T5 Lamps    Over 300 Colors Available    UL94HB Rated Polycarbonate    End Caps Protect From Shattered Glass    Easily Trimmed with Scissors

Available in sizes for T12, T8 and T5 fluorescent lamps

The T8 and T5 sizes contain a UV filter that minimizes fading

All standard sizes (2, 4, 5, and 8') are easily trimmed to accommodate any size lamp

Related Questions and Answers

Q: 1. The manual shows you can reverse the center column. Is it possible to then attach a head and camera facing the floor?

A: Yes it is possible to attach a head to the column while it is in reverse.

Q: 2. Trying to compare the Gitzo GT3542L & the GT2543L to some of the CF tripods from Induro. Anybody care to give me your 2 Cents?

A: When you see them side by side you'll but the Gitzo,I was real close to buying the Induro head though but settled on the Kirk BH-1

Q: 3. Is this a micro v standard size / will this fit on the built in v mount plates on a komodo-x or v-raptor?

A: The maximum width battery that can fit onto Komodo-X and V-Raptor, is 3.9". Because this battery is 4.1", it will not fit onto either of these cameras.

Q: 4. whats the difference between GT3542L and GT3542??

A: The GT3542L is The longer version of this tripod. The folded length is 23.2 with a max height of 70.1 . The GT3542 is 21.3 folded and has a max height of 63.8 . I needed the taller version.

Q: 5. What is the max height of the tripod without extending the center column? Thanks.

A: This tripod measures 59 1/2 inches without extending the center column and without a ball head mounted onto it. I am 6 ft tall, and I find this tripod to be more than adequate for all the landscape photography work that I do - note that it also comes with a short center column, allowing you to work very close to the ground if desired.

Q: 6. Is this tripod sturdy enough for a Nikon 600/4 VR mounted on a full Wimberley (WH-200)?

A: I have this tripod with the Wimberley gimbal head. Together they weigh about 7 pounds. I use this rig with a 200-400 and a 1.4TC and my D810 or D750. I get better results with the D750 as there is less sensitivity to micro-blur.The rig is substantial enough for my lens, but I do not know how much heavier/longer your 600mm lens is. I do not think weight is the issue, but you can check the specs and compare.My experience is that it is about technique and settings. I get best results with a bean bag resting on the lens, and if the target is stationary, I use m-up. Also use electronic front curtain shutter. The issue is vibration from the shutter rolling down the lens. I do not think this is a tripod issue. I sometimes use my arm laying on the lens if I am shooting fast enough.

Q: 7. Does the RRS ball head BH-40 fit the Gitzo GT3542L tripod leg?

A: Yes RRS ball head BH-40 does fit the Gitzo GT3542L tripod leg.

Q: 8. Can it hold Sony a7rIII and fitted Sony 24-70 f/2.8?

A: No, the Sony a7R III Mirrorless Camera with the Sony FE 24-70mm f/2.8 GM II Lens attached will not fit in the Lowepro Adventura SH 140 III Shoulder Bag (Black).

Q: 9. If you don't want a recycled material bag, what else does Lowepro sells that would be about the same?

A: The Lowepro 160 would be a similar size bag: https://bhpho.to/3MX6QDZ

Q: 10. Will this work for Wimberley WH-200 Gimbal Tripod Head II with Quick Release Base ?

A: This tripod, like most professional level tripods has the 3/8 attachment so your Wimberley gimbal should work just fine.