The Tiffen 5 x 6" CC10G Green Filter is a color compensating (or color correction) filter for use when making color balance adjustments. It can be used to alter the color balance of a scene by placing in front of a light source or the lens of your camera. It can also be used to apply color corrections when used in the darkroom with an enlarger or to help pre-visualize color adjustments when viewing prints.

Green is the opposite of magenta and can be used to reduce magenta tones or casts within a scene or print. This green CC10 is more dense than a CC05 filter and less dense than a CC20 filter, and requires a 0.3 stop compensation for normal exposure results.

Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 5 x 6" / 127 x 152.4mm.

Color Compensating Filter    Achieve Proper Color Balance    Also for Printing and Viewing Use    ColorCore Technology

Green color compensating filter for use when making color balance adjustments.

Green is the opposite of magenta and is added to reduce magenta tones or color casts within a scene or print.

Related Questions and Answers

Q: 1. Will this pack hold a hydration pouch (3l)?

A: Yes, but it's not really designed for that. You can put the hydration bladder in the main pocket.

Q: 2. Will a Peak Capture plate attach to the straps on this pack?

A: As the bag itself has no arca-swiss clamp, there will be no way to attach the plate to the bag. However, if you mean attaching the Peak Design Capture Clip system, there are several places where the clip can be attached. The straps taper out and can be snuggly fit over the thickest part of the material. If your equipment isn't too heavy (medium-SLR or mirrorless) you can also attach it to several of the thinner-material straps that are on the main shoulder straps. In either case, we recommend that you use the hex-head fastening screws rather than the normal ones.

Q: 3. I have a Canon 60D, Canon 100-400mm lens, and a Tokina 11-16mm lens. I don't think this bag will be able to hold all this, but does someone have a similar set up to check for me? I wanted to ask before I rule it out. Thanks!

A: Yes, this bag can absolutely hold a Canon 60D with 11-16mm attached, and a 100-400mm Canon lens.

Q: 4. What are the dimensions of the camera compartment?

A: The camera compartment is 11.4 x 9.1 x 5.5 inches.

Q: 5. can I add a water bladder?

A: No. I think the outside pockets are too short. Think water bottle, not bladder. Also no provision for the drinking tube. Better to not mix cameras and water anyway!

Q: 6. Anyone tried to fit a 13 Macbook Pro 2017 in the pocket?

A: I've a MacBook Pro 13' 2015 and it does fit nicely in the front pocket.A 15' version would be too big.

Q: 7. Does this fit the Rode NTG3 shotgun mic?

A: It fits the NTG2, so if they're anything close to the same size than yes.

Q: 8. Can this be used with other cameras like the Sony a6000 series?

A: The FUJIFILM INSTAX SQUARE LINK Smartphone Printer (Ash White) is designed to be used with the INSTAX SQUARE LINK application, which requires a Bluetooth connection. It would not work with a camera directly.

Q: 9. Will a 11 w x 13 h x 2 thick binder fit in front personal items section? Along with a book or two to read?

A: I can barely fit in my ipad2 when loaded with gear. (MK IV - 70-200, 28-70, 50mm, batteries etc) The bag is not very flexible (which is good for protection) so outward expansion is minimal. I can rig the bag up to carry my MacBook when traveling but its very tight.

Q: 10. Will an Olympus omd em1 with a Panasonic 100-400 attached fit?

A: A canon 100-400 on a canon EPA 80d fits perfectly in the bp 450 aw pack. We returned the 250 for the 450 and the 450 is the perfect Backpack. Just came Back from a week in Tanzania. Nancy