The Dalite 52x92" Advantage Deluxe Tensioned Motorized Front Projection Screen is unique in its design. It is manufactured to be installed during the construction phase of your media, class or board room. Afterwards, the fabric is added to complete the set-up. This stylish ceiling recessed screen is for those who don't want the screen showing when it is not immediately needed but available at the flip of a switch.

For easy installation, the Tensioned Advantage Deluxe is available with SCB-100 and SCB-200 (RS-232 serial control board) or Low Voltage Control unit built into the case.

Tensioned models are made with a thin vinyl surface that is stretched to assure a perfectly flat surface. Non-tensioned screens are fiberglass and not as taut as tensioned models.. Deluxe models have a door that opens and closes, Non-Deluxe models have a 2" slot.

Ceiling Recessed    Tensioned    106" Diagonal    HDTV Format    16:9 Aspect Ratio    Cinema Perf High Contrast Finish    Patented in-the-Roller Motor    Quiet Operation    Case Put in During the "Rough-in" Stage

Handsome white powder coated closure doors and case provide a clean look and allow easy installation of ceiling tiles

Front projection surfaces standard with black backing for opacity

UL Plenum Rated case

Related Questions and Answers

Q: 1. Is it bright enough to throw light about 15-20 feet?

A: No, Lowel Go Lite Compact LED Light performs better under 6 - 9 feet at full power. Under 15-20 feet you will need to push your camera exposure settings.

Q: 2. Can this zoom control also work with a Fujinon 19-90 lens?

A: The VariZoom VZPGC20 20-Pin Zoom Control for Canon CN-E 18-80mm & 70-200mm Lenses is designed for Canon lenses. The recommended zoom control for the Fujinon ZK19-90mm T2.9 Cabrio Lens (PL Mount) would be Fujinon Digital Zoom Demand Controller for ENG/EFP Lenses, BH #FUERD10AD01M.

Q: 3. Why this lens is not compatible with FF lens? 200, 300, and 560 are fully compatible with FF base on tests and those lenses were made base on FF film lenses

A: B&H information is incorrect. It has been confirmed directly with Pentax and indirectly with practical usage by many users that this lens is in fact entirely compatible with a FF sensor.

Q: 4. Will this work with my Godox AD200 where I can screw the strobe to the top and just pop an umbrella in? Sort of like the one that comes with the AD200, but made of metal? Thanks.

A: It will work with a AD200. Its much stronger than the little plastic mount.

Q: 5. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 6. Does this control come with a cable long enough to mount to a pan bar?

A: The cable is 40 inches long, plenty for mounting on a tripod panbar. (Or as this former movie camera operator would say, panhandle.)

Q: 7. Will a Canon Rebel T5i with a 18-270 zoom and a kindle fire HD fit in?

A: Yes it will fit but it may be a bit tight. I carry a Canon D70, zoom lens, flash, cleaning kit, a small note book & a couple pens in mine & can still add a wallet if I don't want to carry my pocket book.

Q: 8. Can you tell me which softbox is compatible with Elinchrom D-Lite 400W/s RX 4 Flash Head?

A: You may use a softbox such as the Elinchrom Rotalux Deep Octabox (100cm / 39"), BH # EL26648 along with a speed ring to attach it such as the Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads, BH # EL26570. https://bhpho.to/3XZVRNP https://bhpho.to/3XzSKwp

Q: 9. What volume does the bag hold?

A: The bag is not rated by volume. It mentions that the crossbody bag can accomodate a large camera body with attached lens and one to two additional lenses. The seven roomy pockets provide lots of space for keys, a wallet, sunglasses, phone, iPad or tablet, etc.

Q: 10. Will this work with a Sony PXW-Z280?

A: Yes it should. The PXW-Z280 has a LANC input for a controller, which is the kind of connection this product has. They should work well together.