The Dalite 78x139" Advantage Deluxe Tensioned Motorized Front Projection Screen is unique in its design. It is manufactured to be installed during the construction phase of your media, class or board room. Afterwards, the fabric is added to complete the set-up. This stylish ceiling recessed screen is for those who don't want the screen showing when it is not immediately needed but available at the flip of a switch.

For easy installation, the Tensioned Advantage Deluxe is available with SCB-100 and SCB-200 (RS-232 serial control board) or Low Voltage Control unit built into the case.

Tensioned models are made with a thin vinyl surface that is stretched to assure a perfectly flat surface. Non-tensioned screens are fiberglass and not as taut as tensioned models.. Deluxe models have a door that opens and closes, Non-Deluxe models have a 2" slot.

Ceiling Recessed    Tensioned    159" Diagonal    HDTV Format    16:9 Aspect Ratio    Dual Vision Finish    Patented in-the-Roller Motor    Quiet Operation    Case Put in During the "Rough-in" Stage

Handsome white powder coated closure doors and case provide a clean look and allow easy installation of ceiling tiles

Front projection surfaces standard with black backing for opacity

UL Plenum Rated case

Related Questions and Answers

Q: 1. Can I install arms on the sides after installing this rear control handle? I want to have at least one additional arm for stability.

A: The Tilta Rear Operating Control Handle for DJI RS 2 Gimbal retains the Nato mounting points for DJI accessories like handles. Each side of the Tilta control handle retains these mounting points.

Q: 2. Where do the third party/nucleus M motors grab power from? 2 out of 3 USB-C are used for raveneye and camera control. Can you run multiple motors? How will I attach nucleus M motors to the 12mm rods?

A: Third party/nucleus M motors grab power from a power source that has a D-tap port, using a 7-pin to D-tap cable. After powering one motor, other motors may be daisy-chained to each other. Unfortunately there isn't a 12mm to 15mm rod adapter as of 4/19/21.

Q: 3. Will this work with the RS4 Pro?

A: Yes, the Tilta Rear Operating Control Handle for DJI RS 2 Gimbal also supports the DJI RS4 Pro gimbal.

Q: 4. Does this work with DJI RSC2?

A: You will be able to mount the Tilta Rear Operating Control Handle for DJI RS 2 Gimbal on the RSC 2 but it will not support gimbal control.

Q: 5. November 2023: Does this work with the regular (non pro) DJI RS3 gimbal, and work with all of the functions/controls of the RS3?

A: The Tilta Rear Operating Control Handle for DJI RS 2 Gimbal will support the DJI RS3, RS3 Pro gimbals. Please note when working with the DJI RS3/RS3 Pro gimbals, Tilta added the following info. RS3/RS3 Pro: The M Key is NOT able to mimic the function of the gimbal. The M Key on this unit can ONLY change the Mode setting.

Q: 6. Would i be able to use the handle on the side, with the dual handle power bracket?

A: This handle cannot be used on the side. It is designed to be used on the rear only.

Q: 7. Can this handle control a tilta nucleus focus motor?

A: Yes, the Tilta Rear Operating Control Handle for DJI RS 2 Gimbal is able to control the Nucleus-M, Nucleus-Nano, or the DJI wireless focus motor.

Q: 8. Can the Tilta rear handle wheel control a different function, than the main RS2 handle wheel? One does focus, the other iris, for instance? or does one mirror the others function?

A: No one does not mirror another units function There are numerous controls on the handle including a menu button, focus wheel, trigger button, sleep mode button, and joystick, allowing you to control a follow focus such as the Nucleus-M, Nucleus-Nano, or the DJI wireless focus motor.

Q: 9. Will this handle be able to run and stop the RED Komodo?

A: no it will not.

Q: 10. Can it fit around a Zhiyun Crane v2 as well?

A: Unfortunately no, the column on the Zhiyun Crane V2 does not match the shape of the Zhiyun Crane 2S.