The Tiffen 3 x 4" 3 Red Soft-Edge Graduated Filter helps to specifically add a warm, bright red coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 3 color density provides less red coloration than the 4 density, but more than the 2 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 4" / 76.2 x 101.6mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

3 Density Color Graduated Filter    Red Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a bright red coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Will this work with the Sony FX3?

A: Yes, the Core SWX Powerbase EDGE Battery with NP-FZ100 Cable & D-Tap Charger is compatible with the Sony FX3.

Q: 2. Please confirm that it comes with a charger included or do I have to buy it separately and kindly recommend the connector top my sony A74?

A: The Core SWX Powerbase EDGE V-Mount Battery does not come with a charger. You would need a charger such as the Core SWX PB70C15 D-Tap Wall Charger (BH #COPB70C15). To connect the battery to the Sony a7 IV, a dummy battery such as the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable (BH #KODTSA7SDB) would be needed.

Q: 3. Will this work with Alpha 6300 and 6500 on a Zhiyun Crane 2 gimbal?

A: It may be possible, but it is not something we recommend. The shape of this battery may make it difficult to balance on a gimbal. A better solution would be to get the battery grip for the A6300 or A6500. These will allow you to double the battery life by using two Sony NP-FW50 batteries.https://bhpho.to/2KRFApm

Q: 4. works with Sony a6500 ?

A: It should work with the Sony A6500. The A6500 uses Sony NP-FW50 batteries, which is the kind of dummy battery this system has.

Q: 5. Pls tel me charging time of the Powerbase?

A: It takes 2-3 hours depending on the amount of discharge.

Q: 6. There are two D-Tap connectors. One labeled PTap and the other SMARTAP. Which do I use with the supplied AC adapter for charging and does it matter which I use to power cameras?

A: For charging the battery you would use the standard D-Tap Connection. For powering a camera you can use either of the D-Tap or the SmartTap, however the SmartTap offers the ability to communicate SMBUS/smart battery data to compatible cameras.

Q: 7. I have had this battery for 6 months. Now it is telling me it will take 11+ hours to charge. Is it defective?

A: An estimated time of 11+ hours to charge your battery means there is a problem with your battery.

Q: 8. Will this work with the Panasonic DC-G9?

A: Yes, The Core SWX Powerbase EDGE Cable for Panasonic DMW-BLF19 Devices would work with the Panasonic GC-G9 camera. See this link for a full kit with battery that will work with your camera model. https://bhpho.to/32PcsNo

Q: 9. Does this require a separate purchase of the D-Tap to 2-Pin Cable to use the dummy battery?

A: No, the Core SWX powerbase edge cable for sony L-Series connects directly to the battery.

Q: 10. Will this work with a Canon XF-405?

A: Yes, there should be no issues as the XF-405 uses the same barrel connector and can operate under the supplied power flow.