This 6' Hosa BNC to BNC Antenna Cable features two BNC connectors designed to data and antenna applications. The 50-ohm coax provides accurate data transfer with 10Base2 networks and RF antennas on wireless receivers. OFC conductors and internal braiding make for a secure connection.

50-Ohm Coax Cable    For Data and Antenna Applications    BNC to BNC Connectors    OFC Conductor, Braided

Related Questions and Answers

Q: 1. Do I connect both SMA connections to the base station or is one a pass-thru?

A: Yes, both SMA ports on the Hollyland Extension Panel Antenna do need to be connected to the base station.

Q: 2. Are the removable drives proprietary or can I use my own drives?

A: The drives designed to work with it are attached to a carrier that fits in the RAID unit. If you don't mind taking apart the original drives and removing and reattaching the carrier, you could use other drives as well.

Q: 3. Are both of the ports meant to connect to the receiver, or is one a "thru" which can be used to extend the signal range by connecting another antenna?

A: One port is for connection to the SYSCOM 1000T or Mars T1000 base station using the included cable and there are two RP-SMA male mounts on the bottom which can be used to add optional antenna extensions for an even more stable transmission.

Q: 4. Can I use this with the Bolt 6 LT ? If so, does the range of the receiver (either 750 or 1500) impact the range of the array?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) can be used with the Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit. The product provides a robust and uninterrupted directional signal, but the range will still be limited to that of the bolt set.

Q: 5. Are both of the ports meant to connect to the receiver or is one port a "thru" which can be connected to another antenna for increased signal?

A: There are two RP-SMA male mounts on the bottom to add optional antenna extensions for an even more stable transmission

Q: 6. Will this help when experiencing interference from concrete and steel walls?

A: Yes, the Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz can be used to allow for much greater distance or amplify the RF signal when encountering difficult wall types.

Q: 7. This is working for Bolt 6 LT as well?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (Gold Mount) is compatible with the Teradek Bolt 6 LT HDMI 750 Wireless Receiver, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (Gold Mount), the Teradek Bolt 6 LT 1500 3G-SDI/HDMI Wireless Receiver (Gold Mount), and the Teradek Bolt 6 LT MAX 3G-SDI/HDMI Wireless Receiver.

Q: 8. When using with the Bolt 6 LT, does the range of the receiver (either 750 or 1500) impact the range (5000) of the array?

A: The Teradek Antenna Array for Bolt 4K 4.9-7.3 GHz (V-Mount) can be used with the Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit, and the product provides a robust and uninterrupted directional signal, but the range will still be limited to that of the bolt set.

Q: 9. Since the Syscom T1000 is a full 8 pack system, does that mean I have to buy 2 of the Extension panels to support all 4? Cause it says the extension panel only support 4 belt packs. Also, could I use the extension panel and still use the antennas that come with the Syscom t1000 together?

A: Yes, two of the Hollyland Extension Panel Antenna for SYSCOM 1000T/Mars T1000 would be required for full coverage of all components in the Hollyland Syscom 1000T-8B Full-Duplex Intercom System with Eight Beltpacks and Headsets. The Extension panel would replace the standard antennae used in the system and would connect to the same antenna input connections on the base station's back panel using the provided Communication Cable.

Q: 10. What is the signal distance range on this antenna?

A: This unit extends the range of the original antenna by 100 meters.