Cokin Z-PRO 701 Color Compensating CC10C (Cyan) Resin Filter - Some photographic situations require specific color corrections. For example, when shooting daylight film under fluorescent lighting, some magenta correction is needed in order to remove the greenish tint that would otherwise appear.

The amount of color correction required is most accurately measured via a color temperature meter. Cokin Color Compensating filters are made of plastic and are available in three secondary colors: Cyan, Magenta, and Yellow. A typical designation for one of these filters is CC30M. The "CC" stands for Color Compensating. The "30" stands for a density of 0.30 and the "M" is for magenta.

The Z-PRO Series is recommended for focal lengths of 20mm onwards (in the 35mm format). This filter is made of CR39 Resin which is a reputable lightweight and shock-resistant optical material also used for ophthalmic glasses.

Helps Balance with Fluorescent Light    Excellent for Architectural Work    Available in Various Strengths    High Quality CR39 Resin

Color Compensating filters are made of resin and are available in the three primary colors: Red, Green, and Blue; and in the three secondary colors: Cyan, Magenta, and Yellow

A typical designation for one of these filters is CC30M; the "CC" stands for Color Compensating; the "30" stands for a density of 0.30 and the "M" is for magenta

Related Questions and Answers

Q: 1. Is this made of plastic or metal?

A: This is made out of plastic.

Q: 2. Can you get this with a gold mount?

A: The GVM Pro SD650B Bi-Color LED Monolight (650W) BH #GVMPROSD650B only comes with a V mount plate.

Q: 3. Does the LS 600X require a DMX terminator when at the end of the line or does it have a switch that terminates the dmx line?

A: Yes, the Aputure LS 600x Pro Bi-Color LED Monolight (V-Mount) should use a DMX Terminator if it is at the end of the line. You should always use a DMX Terminator when you get to the end of the line. This would be the correct industry practice because it eliminates any unexpected glitches that may occur from not Terminating DMX properly.

Q: 4. Will this fit the Leica CL? (Digital CL)

A: This is specifically designed for Leica TL2. So results may vary.

Q: 5. The 600x is only bi-color, not RGB, correct? The Overview is slightly misleading as it says the light has "color options". Also, I assume the various Sidus lighting effects, i.e. fireworks, are limited to shifting color temps, not RGB, correct?

A: The following unit offers no RGB color output but offer the following bi-color technology. Color Temp: 2700 to 6500K The unit also offers special effects such as Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Pulsing, Strobe, Explosion and Fire only limited to color shifting.

Q: 6. Will this fit the leica mp (.72)?

A: Unfortunately this would not work on that camera. We suggest you use the Match Technical Leica Hot Shoe Cap linked here. https://bhpho.to/3qjWsdP

Q: 7. Is there a longer cable available to go from the light to the controller box?

A: There are no alternative cables available for the GVM Pro SD650B Bi-Color LED Monolight (650W) BH #GVMPROSD650B.

Q: 8. Is this made in China? or where?

A: Yes. The following unit is made in China.

Q: 9. Can the LED Monolight GC60X5 be charged while in use? Or is it not possible to charge and use at the same time?

A: The INKEE GC60X5 Bi-Color LED Monolight BH #INGC60X5 is a 100w light. Considering current PD capable chargers it would not be possible to use the light at full power and charge at the same time.

Q: 10. Does the GVM 650 Pro have fresnel accessory?

A: Yes, there are fresnel lens accessories available for the GVM Pro SD650B Bi-Color LED Monolight (650W), like the GVM F40 Fresnel Attachment for LED Light Spotlight (GVMF40).