You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Cokin Z-pro Series Hard-edge Graduated Neutral Density 0.6 Filter (2-stop)

Cokin Z-pro Series Hard-edge Graduated Neutral Density 0.6 Filter (2-stop)
  • Product Code: ga214732
  • Availability: In Stock

$149.70 $239.52

This Cokin Z-Pro Series Hard-Edge Graduated Neutral Density 0.6 Filter is designed for use with a Cokin Z-Pro Series Filter Holder. It helps to darken specific areas of an image, such as bright skies, while allowing for a normal, unaffected exposure in the other regions of the image. The filter is densest at the edge and tapers to clear by the middle, with a hard-edged line of transition between the dense and clear areas. A neutral density filter with a hard-edged line of transition is useful for images which include defined horizon lines. Neutral density filters do not affect the coloration of the image and this filter provides up to a 2-stop reduction in light from entering a lens.

This filter is made of durable, optical resin (CR39) and measures 1.6mm thick.

For Cokin Z-Pro Series Holders    Up to 4x Filter Factor, 2 Stop    Reduce Exposure in Selective Areas    Hard-Edged Line of Transition    Optical Resin CR39 Filter

Parameters
Filter TypeGraduated ND
Exposure Reduction2-Stop
Graduation TypeHard Edge
Size3.9 x 5.9" / 100 x 150 mm (Cokin Z-Pro) 
Front Accessory Thread / BayonetNo
CoatingNo
Filter Thickness0.06" / 1.6 mm
Filter MaterialRigid Plastic
Packaging Info
Package Weight0.15 lb
Box Dimensions (LxWxH)6.7 x 4.7 x 0.4"

  • Compatible with a Cokin Z-Pro Series Filter Holder
  • Darkens bright areas of an image, such as skies, while leaving the remainder of the frame unaffected
  • Provides up to a 2-stop reduction of light in selective areas
  • Hard-edged line of transition between the dense and clear areas
  • Useful for images which include defined horizon lines
  • Filter does not affect the overall coloration of the image
  • Constructed from optical resin (CR39) for clarity and durability

Related Questions and Answers

Q: 1. is this suitable for sony pxw z 280 yo record XAVC I 4k

A: Yes this is compatible with the Z280 for 4K recording.

Q: 2. How is the visibility outdoors?

A: This teleprompter is not designed to be daylight viewable If you plan to use it outdoors its performance is going to be determined by the brightness of the screen on the tablet that you intend to use. Typically a teleprompter designed for outdoor use has a brightness measurements of 1000+ nits while the average tablet has a brightness between 300-500 nits. This doesn't necessarily mean that you 100% can't or shouldn't use it outdoors but it will be much easier to read the screen on an overcast day than on a bright summer day.

Q: 3. which is the best card to use so y pxw z 280 to recoed xavc i 4k

A: The SxS Pro cards are going to be great at recording XAVC 4k for the PXW Z 280.

Q: 4. Will this work with an Arri Alexa?

A: depends on what camera you are using. If you are using any of the -xt series or the LF you can use it with an adapter, or with some other alexas as far as I know. Contact ARRI support to get a better answer.

Q: 5. The read and write speed is listed as "Read Speed: 3.5 GB/s Maximum (Burst) Write Speed: 3.2 GB/s Maximum (Burst) Write Speed: 1.3 GB/s Minimum" but should be Gbps. Right?

A: Hi Bill, Yes, Here are the specs from Sony’s site: -Read speed - 3.5Gbps (=440MB/s)* -Write Speed - 3.2Gbps (=400MB/s)* Minimum Write Speed** - 1.3Gbps Regards, ~Ralph

Q: 6. Does the picture stay in focus down the zoom range

A: This is best for for shooting situations in which zooming need is minimized for this is a partial zoom adapter. It will allow zooming only from wide angle to mid-range and you must use auto focus mode. Also note: it has a bayonet mount meant for attaching it directly to the lens of the Sony HVR-Z7U and HVR-S270U.

Q: 7. I have a 190XB tripod and want to make certain this Leveling Center Column is the right fit? Thanks!

A: Yes, this column is compatible with the 190XB.

Q: 8. Is this card compatible with the Sony EX3 ?

A: Hi Mariam, Yes, but you dont need a card that fast. This card works just as good with the EX3 for almost half the price:Sony 64GB SxS-1 (G1C) Memory CardB&H # SOSBS64G1C MFR # SBS64G1C-Jen

Q: 9. Will this work with a thunderbolt 2 connection on my 2014 iMac? What cable do I need?

A: You need to connect it to a Self-Powered Thunderbolt Dock. Thunderbolt 2 cable does not supply enough power to run the reader

Q: 10. Could this be used as a replacement column in the Manfrotto Compact Action Tripod? I just bought that tripod (knowing full well the head isn't removable), but was wondering if there's a column available to replace the stock one?

A: The center column is not replaceable on the compact action tripod.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Nikon Neutral Clear Filter (58mm)

$104.85 $130.01

Skb Tom Case (12 X 12", Black)

$509.97 $617.06

Portabrace Fc-3 Filter Case

$397.20 $528.28

Westcott X-drop Pro Backdrop Case

$149.70 $229.04

Samvix Leather Case For Smartbass Pro

$29.97 $42.86

Ruggard Lens Case (black, 12 X 5")

$95.85 $125.56

Lenscoat Legwrap Pro 512 (black)

$262.50 $404.25

Products You May Like

Peak Design Camera Cube V2 (black, Small)

$179.85 $267.98

Tiffen #12 Yellow Filter (55mm)

$83.97 $110.00

Rf-links An-450 Uhf Antenna (0 Db Gain)

$178.50 $237.41

Tenba Solstice V2 Sling Bag (black, 12l)

$419.85 $650.77