The 100 x 100mm Cokin Z-Pro Series ND Filter is a neutral density filter providing a 1-stop exposure reduction. This 0.3 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By increasing your aperture or slowing your exposure time, you can control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.

Cokin filters are constructed from optical resin and are notably light in weight, have a high resistance to shocks and drops, and provide optimum light transmission for high image quality. This filter is compatible with the Cokin Z-Pro filter holder.

0.3 Optical Density    Optical Resin CR39 Filter    Increase Exposure Length    Compatible with Cokin Z-Pro Holder

0.3 neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required.

Providing a 1-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily.

Neutral density filters do not affect the overall coloration of the image.

Filter measures 3.9 x 3.9" / 100 x 100mm and is compatible with the Cokin Z-Pro filter holder.

Related Questions and Answers

Q: 1. What is the height and weight of this head?

A: Height: 6.5 inches Weight: 4.4 lbs.

Q: 2. Will this fit an ET-40AAM tripod from E-Image? It has an EH-60 ball on it now that isn't so fluid anymore.

A: Was the original kit the EK60AAM? If so, this, or any other 75mm ball fluid video head will work in the tripod leg's 75mm bowl.

Q: 3. Hello! Tell me please if this ball can be turned to a half ball to match slider dolly?

A: Hi , I used it with Ikam - IK -RSR6 Hi - Hat Riser, work 100.BRRenzo M

Q: 4. Is the GH06 compatible with the Sachtler Flowtech legs w/75mm bowl?

A: Yes, you should be able to use the E-Image GH06 Fluid Head with the Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet.

Q: 5. Is the head Arca-swiss compatible?

A: I'm afraid not. The GH03 head uses the GP1 Camera Plate.

Q: 6. What's the minimum weight this head will support using the counterbalance? A Panasonic GH4 with kit lens weighs about 1 kg and this seems to be too light activate the counterbalance properly. By properly I mean using the camera balanced on the head, the counterbalance at its lowest setting (1) is still too strong and causes the camera to bounce back to an original position. The purpose of the counterbalance is keep the camera at a fixed attitude when you release the pan handle--correct? I've experimented with a heavier lens on the GH4 (nearly 2 kg total weight) and the counterbalance works a lot better. Comments?

A: The head's lowest counterbalance setting as you have discovered is too strong for the load you are using it with. The only solution would be to add more weight or get a lower capacity head.

Q: 7. what is the material used in the build of this product?

A: The main body is aluminum, with plastic knobs and other such miscellanea.

Q: 8. Could I replace the head on my Libec LX7M Tripod with this one?

A: yes you should be able to, the libec accepts 75 mm ball

Q: 9. Any possible way to remove the ball head? Are there any screws on the bowl that would allow it to be taken off?

A: It is not possible to convert this head to a flat base tripod. However Ikan does offer the IK-RSR6 Hi-Hat Riser, you could use this instead to connect this head to a flat base with a 3/8"-16 connection. https://bhpho.to/2ro3GCc

Q: 10. What is the counterbalance weight for this Tripod head since its fixed?

A: The GH03 head counter-balance weight is 5KG.