The Tiffen 95mm Coarse Thread Gold Diffusion/FX 1/4 Filter diffuses strong light entering the lens and produces a glowing effect. While the resulting image appears softer and ethereal, there is little loss of clarity or detail. This filter works by diffusing the light entering the lens with small aberrations; by spreading the light more evenly, a soft glow is created rather than the sharp, well-defined image when shooting without a filter. In addition to the diffusion provided, a gold tint is also added to the image giving more warmth and helping to balance skin tones. This filter has a 1/4 density, providing the least amount of softening.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.

Diffusion Filter Creates Glow Effect    Softens Skin and Blemishes    Gold Tint for Additional Warmth    Slight Reduction in Contrast    ColorCore Technology

Diffuser filter provides an ethereal quality to photographs, resulting in a dream-like atmosphere.

Soft image quality does not detract from the overall detail of the image.

Light entering the lens is diffused by small aberrations, creating a soft glow rather than the sharp, well-defined image when shooting without a filter.

Gold tint provides additional warmth and helps to balance skin tones.

Related Questions and Answers

Q: 1. Is this monitor compatible with ARRI alexa or RED epic?

A: Yes! Its compatible with both. Its best also, if you get a vesa to c stand mount, so you can mount it on a c stand.

Q: 2. Am I missing something here? I was under the impression that I pop the battery onto the plate, run a cable out of the plate and into the camera/monitor/ipad/etc... and that was all there was to it. HOWEVER, I get nothing. I have four Anton Bauer batteries that are all fully charged. I find it hard to believe that all four would have gone bad. Yet, when any of them are attached nothing happens. I've flipped every switch on the batteries and Lanparte plate I could find, I've used different cables and adapters - nothing! Now, I do get power when plugged into the wall via the charging cable. So I guess what I am wondering is - am I supposed to run D-tap OUT and then back IN to the 12vDC charging port to power the whole thing? or what? Could mine be defective? Any advice would be appreciated. Thanks!

A: The unit may be defective. You should get power from any of the plugs. Are you getting power from the D-Tap?

Q: 3. How do you add LUTs to this monitor? Seems like a very complicated process.

A: Please follow the instructions manual (page 30-32). https://www.bhphotovideo.com/lit_files/657209.pdf

Q: 4. can I plug in a S-7500F dummy adapter, which comes with SWIT S-3602F?

A: Not that we are aware of. This product is only compatible with Lanparte Dummy Batteries.

Q: 5. Will this hold a canon R3, lenses and dji rs3 pro gimbal?

A: No, the Evoc CP 18L Camera Backpack (Heather Gold) is too small to fit the R3 2-3 lenses and a DJI RS3 pro gimbal.

Q: 6. Anyone notice very loose DC output ports? Mine feel very loose and unsteady, even with the included cables. Thinking maybe I got a dud.

A: If you feel that a product you received is defective please contact us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a so we can help you trouble shoot the product and set up an exchange if needed.

Q: 7. Has anyone else had the green knobs break and not be able to tighten onto the rods? this happened to me during first use.

A: You can power you entire rig from ALL ports (at the same time) if the LanParte Battery Pinch is plugged into a home wall outlet with the supplied 110V AC adapter. Unfortunately this unit will not charge original OEM Anton Bauer batteries , since they require OEM Anton Bauer chargers - propriety electronics I guess. Lucky I kept my OEM Anton Bauer charger which I use it to charge my three Dionic 90 AB batteries for use on the LanParte Battery Pinch with no issues to date. In Dec 2018 I replaced one of the dying Dionic 90 batteries with a LanParte AB -150 which I can charge/use on the LanParte Battery Pinch. Now I have the best of two worlds.

Q: 8. This monitor accepts 4 ins, and displays them as a quad-view on the screen, but it has only 1 3G-SDI out. What does it output?

A: Lilliput BM280-4K Carry-On 4K Monitor (V-Mount) does not do quad view. This one can: FeelWorld 28" 4K Quad View Carry-On Broadcast Monitor BH #FE4K2809HSDC • MFR #4K280-9HSD-CO

Q: 9. Is this monitor rack mountable?

A: Yes but you have to remove from the hardcase (remove 4 screws on the front).

Q: 10. What is the maximum supported bandwidth over the HDMI 1.4 inputs?

A: The Lilliput BM280-4K Carry-On 4K Monitor (Gold Mount) HDMI 1.4 port supports up to 10.2Gbps.