Vinyl Record Player Phono Pre Amp

Art Dj Pre Ii Phono Preamplifier

Product Code: ga215281
Availability: In Stock

$197.97 $314.77

Qty

0 reviews Write a review

Description
Reviews (0)

Designed to amplify and EQ your vinyl records, the DJ PRE II from ART allows you to play and record into a variety of sources including your digital audio workstation, sound card, home stereo, or main monitor system.

The DJ PRE II features a switched (100pF / 200pF) analog capacitance to optimize your phono cartridge response. A low cut filter removes turntable rumble, while leaving the audio pristine. The front gain control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources.

The built-in low-noise circuitry is highly accurate and precisely conforms to the RIAA standard, while the low impedance line output can be used with any sound card. The DJ PRE II is housed in an all-aluminum black anodized chassis and ships with a power supply.

Phono Preamp for Recording and Playback Switchable Input Capacitance: 100pF/200pF Low Cut Filter Switch Gain Trim and Signal Gain/Clip LED Low Noise Precisely Conforms to RIAA Standard Low Impedance Output All Aluminum Black Anodized Case Includes Power Supply

Parameters
Frequency Response	10 Hz to 50 kHz (±.5 dB)
EQ RIAA Characteristic	Phono EQ Standard: Conforms to RIAA Curve
THD	Total Harmonic Distortion: .01% typical @ 1 kHz
Hum & Noise	> 90dB below clipping
Input Impedance	47 kOhms in parallel with either 100 pF or 200 pF
Maximum Input Level	40 mVrms @ 1 kHz
Maximum Gain	45 dB @ 1 kHz
In/Out Connections	RCA
Maximum Output Level	+ 6 dBu (1.4 Vrms)
Filter Type	Filter Type/Response: Switchable, low cut, -3 dB @ 22 Hz
Power Requirements	7-12 VDC or 9-12 VAC @ 150 mA
Dimensions	1.9 x 4.6 x 4.5" / 47.0 x 116.8 x 114.3 mm
Weight	1.3 lb / 0.6 kg
Packaging Info
Package Weight	1.6 lb
Box Dimensions (LxWxH)	9.95 x 5.25 x 2.8"

High accuracy/low noise preamp
Switchable low cut rumble filter
Variable preamp gain
Signal present/clip indicator
Selectable cartridge loading
RCA preamp outputs
Heavy duty extruded chassis

Related Questions and Answers

Q: 1. I saw that you responded that this will work with a Leica Q3. please confirm that it will also work with a Leica M6?

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection has a center pin connection. It will work on any hot shoe with a center contact like the Hotshoe on the Leica M6 Rangefinder Camera.

Q: 2. Does this with any model flash to any model camera hot shoe?

A: Vello Universal Hot Shoe Adapter won't work well with Sony or Minolta flashes/cameras as their flash shoe is different, but most other models it will work.

Q: 3. Does this fix the autofocus issues of the previous version? Mainly for Lumix users considering this vs. the Panasonic.

A: The Sigma 24-70mm f/2.8 DG DN II Art Lens (Leica L), BH #SI247028LM will auto focus better. The introduction of a linear motor high-response linear actuator (HLA) to drive the autofocus yields focusing speeds more than three times faster than its predecessor. Additions like accelerated autofocus will help the auto focus.

Q: 4. What warranty does it include?

A: The Sigma 24-70mm f/2.8 DG DN II Art Lens (Sony E) includes a limited 4-year manufacturer warranty.

Q: 5. Will this work with a Profoto a10 flash? I would like to use it on a hasselblad 503cw. Thanks

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will allow the Profoto A10 AirTTL-N Studio Light to sync at the center contact of the hot shoe and trigger in manual mode. The Hasselblad 503cw camera series do not have a port or a hot shoe to connect this adapter. Instead, you will need a lens with the sync port and a PC male to PC male sync cord.

Q: 6. Will this work with Olympus om1

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is indeed compatible with the Olympus OM-1.

Q: 7. Is this lens weather sealed?

A: Yes, the Sigma 24-70mm f/2.8 DG DN II Art Lens (Leica L) has a rubber seal at the base where it marries to the camera body as well as having dust & splash resistance.

Q: 8. I am going to use this hot shoe adapter to connect the Samsung NX10 and Godox AD100 Pro with a PC Sync cable. Will it work?

A: While it is possible to use the Vello HSA-PVU Hot Shoe Adapter with Safe Voltage Conversion with a Samsung NX10 and Godox AD100 Pro for connection with a sync cable, it has not been tested to our knowledge. Your results may vary.

Q: 9. Will this lens work with the Will this lens work with Sigma TC-1411 tele converter?

A: Unfortunately, the Sigma 24-70mm f/2.8 DG DN II Art Lens (Leica L) is not compatible with the Sigma TC-1411 tele converter.

Q: 10. Does this protect the lens?

A: Yes, the Sigma Lens Hood for 24-70mm f/2.8 Art DG DN II Lens protects the lens if you hit it against something. It also shades the lens from flare and ghosting while taking pictures.

There are no reviews for this product.