The Tiffen 5 x 6" Gold Diffusion/FX 2 Filter diffuses strong light entering the lens and produces a glowing effect. While the resulting image appears softer and ethereal, there is little loss of clarity or detail. This filter works by diffusing the light entering the lens with small aberrations; by spreading the light more evenly, a soft glow is created rather than the sharp, well-defined image when shooting without a filter. In addition to the diffusion provided, a gold tint is also added to the image giving more warmth and helping to balance skin tones. The 2 density provides more softening than the 1, but less than the 3.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 5 x 6" / 127 x 152.4mm.

Diffusion Filter Creates Glow Effect    Softens Skin and Blemishes    Gold Tint for Additional Warmth    Slight Reduction in Contrast    ColorCore Technology

Diffuser filter provides an ethereal quality to photographs, resulting in a dream-like atmosphere.

Soft image quality does not detract from the overall detail of the image.

Light entering the lens is diffused by small aberrations, creating a soft glow rather than the sharp, well-defined image when shooting without a filter.

Gold tint provides additional warmth and helps to balance skin tones.

Related Questions and Answers

Q: 1. I have a Sony FX3 and shoot at 4K 60FPS & 120FPS. Would this be the perfect card for my camera?

A: Yes, the Lexar 320GB Professional CFexpress Type A Card GOLD Series is suitable to capture up to 4K resolution at 120 fps in S&Q mode on the Sony FX3 Full-Frame Cinema Camera.

Q: 2. Is these card 400-VPG?

A: The Lexar 1TB Professional CFexpress Type B Card GOLD Series does not have a stated VPG. However, it does have a minimum Sustained Write Speed of 1300 MB/s. Which is beyond the VPG 800.

Q: 3. Would this be compatible with a SLT-A58?

A: No. The Sony A58 needs an SD card like this https://bhpho.to/36MUPMm instead of a CFExpress card.

Q: 4. Will this work with the GH6 in the Prores modes?

A: 100% meets system requirements all a end-user really needs is 1300mbps for a good end-user experience.

Q: 5. Does the Type A card fit the Z8, Z9, or Z7ii?

A: The Lexar 160GB Professional CFexpress Type A Card GOLD Series is incompatible with the Nikon Z8, Z9, and Z7 II Mirrorless Cameras. These cameras are compatible with CFexpress Card Type B. The Lexar 256GB Professional CFexpress Type B Card GOLD Series is a good option. Here is the link: https://bit.ly/3C9bEBj.

Q: 6. Can I see all 4 inputs (picture-in-picture) simultaneously?

A: YES

Q: 7. Is the sustained write speed of this card sufficient for the 8k30 Raw on the Canon R5? (2.6Gbps == 325MBps)

A: This is the best type of card you can get for the R5. In 8K RAW 30 the data rates are about 2600 Mbps. I would probably suggest a different CFExpress card with a faster write speed if you're aiming to film in 8K raw.

Q: 8. Could you please check with the Manufacturer if the card is VPG 400 and/or VPG 800 Certified?

A: While it does not have a VPG, it does have a minimum Sustained Write Speed of 1300 MB/s. Which is beyond the VPG 800.

Q: 9. Does the Type A work with a Nikon D850?

A: No, Lexar 80GB Professional CFexpress Type A Card GOLD Series is not compatible with Nikon D850 DSLR cameras. You need a CFexpres card type B, XQD cards or SD cards. Lexar makes the following option compatible with Nikon D850. Lexar 128GB Professional CFexpress Type-B Memory Card BH #LECFE128GB • MFR #LCFX10-128CRBNA https://www.bhphotovideo.com/c/product/1507384-REG/lexar_lcfx10_128crbna_128gb_professional_cfexpress_type_b.html

Q: 10. Would this be compatible with a Nikon d850?

A: Supposedly, with a camera firmware upgrade, you can use Cfexpress cards in the D850 but I don't think the upgrade is available yet.