Store, protect and transport your valuable art work, prints, documents, and more with the Solander Museum Case from Archival Methods. This case is black with white lining and the 20.5 x 24.5 x 2.5" interior holds up to 24 4/2-ply, 19 4/4-ply, or 34 2/2-ply window/mats. For confident stacking, this strong case is constructed with low-resin basswood sides and spine, and a black, acrylic-coated cloth exterior. The interior lining is acid- and lignin-free card stock. The hinged, lay-flat design provides easy-access to contents. Users will appreciate the latch closure, nickel-plated hardware, and metal 3 x 1.25" label holder.

Holds up to 34 2/2-Ply Window/Mats    Hinged, Lay-Flat Design    Lined with Acid/Lignen-Free Card Stock    Acrylic-Coated Cloth Exterior    Latch Closure    Nickel-Plated Hardware    Metal 3 x 1.25" Label Holder    Low-Resin Basswood Sides and Spine    Strong Enough to Stack

• Case top and bottom is Kappa binder's board (0.1), a bookmaking board with no glue between layers
• Lined with 10-point acid-and lignin-free card stock
• PAT tested and passed
• Covered in book binding cloth with a moisture-resistant, 100% aqueous acrylic coating
• Adhesive is pH-balanced and buffered, <.0008% sulfur content
• Reinforced hinge with dust flap
• Sides and spine are made of low-resin basswood
• Close-tolerance construction to keep out dust

• The tops of these boxes have a lip that helps keep out airborne contaminants
• Sides and spine are made of low-resin basswood for superior stacking strength
• The top and bottom are thick (0.1) binder's board; Interior is lined with acid and lignin-free card stock
• The spine of the case is hinged so that the top can fold open and lay flat for easy removal of contents
• When closed the box is sealed on all sides
• A metal label holder on the front accepts a standard 3 x 1.25" label
• All hardware is nickel-plated

Related Questions and Answers

Q: 1. Can this beauty dish fit on a profoto B2 light?

A: I just tried fitting mine into it and it did fit.

Q: 2. Can this umbrella be used with tungsten continuous lighting, like 250W modeling lamps?

A: The umbrella was designed for use with flash. If you use it with a modeling lamp you will need to take care not to melt the umbrella or catch it on fire. It is recommended to turn the modeling light off after you get an idea of where the light will fall.

Q: 3. Will the Photoflex Large SilverDome fit into the Arrilite 750 Plus without an additional speed ring or adapter?

A: Yes, this Photoflex Large SilverDome NXT will fit an Arrilite 750 Plus directly since the light has an intergrated speed ring.

Q: 4. Will this softbox work with ARRI 650W fresnel?

A: Yes, I have fit it to several of my Mole fresnels that are of similar size. Obviously you'll need the correct speed ring too.

Q: 5. Is this compatible with the A2 monolight?

A: You would need to have the Profoto Clic OCF Adapter II in order to use the Profoto Octa Softbox (3', Silver Interior) with the Profoto A2 Monolight.

Q: 6. will this fit the Connect bay? I know it was asked before, but the answer is not specifically addressing the Atomos Connect bay that is different then the "regular" Ninja bay...

A: Yes, Since this works with the Shogun models it will also support the Atomos SHOGUN CONNECT 7".

Q: 7. How would I get this soft box onto a Desisti 2K Fresnel with a 10 lens. Would a speed ring even work?

A: You would use a speed ring, but I would find out from Desisti if they have one for that model light. I'm not sure if this PHSRAAL2K MFR # 871108 will work or not on your light. The Photoflex Large SilverDome nxt will work with any brand speed ring that can accommodate rectangular soft boxes.

Q: 8. Someone could recommend a carrying case for it?

A: SKB makes a great BD case

Q: 9. Would it work with SanDisk Ultra 3D SSD 1/2 TB?

A: Yes, the ANDYCINE LunchBox III Magnalium Case for 2.5" SATA SSD to Atomos Ninja V/V+ Attachment will be able to support the SanDisk 500GB Ultra 3D SATA III 2.5" Internal SSD (BH #SASDSSDH3526).

Q: 10. Does this fir the Ninja V with Connect?

A: Yes. The following is designed and made for the Ninja V/V+.