The Tiffen 4.5" Round Warm Black Diffusion/FX 1/2 Filter diffuses strong light entering the lens and produces a glowing effect. While the resulting image appears softer and ethereal, there is little loss of clarity or detail. This filter works by diffusing the light entering the lens with small aberrations; by spreading the light more evenly, a soft glow is created rather than the sharp, well-defined image when shooting without a filter. In addition to the diffusion provided, a warming effect is also integrated into the filter helping to further balance skin tones. This filter has a 1/2 density, providing a very small amount of softening.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.

Diffusion Filter Creates Glow Effect    Softens Skin and Blemishes    Warming Effect Incorporated    Slight Reduction in Contrast    ColorCore Technology

Diffuser filter provides an ethereal quality to photographs, resulting in a dream-like atmosphere.

Soft image quality does not detract from the overall detail of the image.

Light entering the lens is diffused by small aberrations, creating a soft glow rather than the sharp, well-defined image when shooting without a filter.

Additional warmth provided adds more of a glowing effect and helps to further balance skin tones.

Related Questions and Answers

Q: 1. Will this fit Tokina AT-X 11-20mm DX nikon mount lens?

A: If you find that lens on B&H and click Accessories, you will find a case that they suggest will fit that lens.

Q: 2. will this case accommodate the Canon RF 600mm f11 lens?

A: Yes the Ruggard Lens Case 10.5 x 4.5" will accommodate the Canon RF 600mm f/11 lens.

Q: 3. Will this case connect properly to the belt loop on the LowePro Toploader Pro 75 AW II?

A: Yes, the Ruggard case will attach to the Pro 75 without any issues.

Q: 4. I just ordered the Nikon AF-S NIKKOR 300mm f/4D IF-ED Lens; upon checkout the Ruggard Lens Case 10.5 x 4.5 (Black) B&H # RULCY110X4 MFR # LCY-110X4 was suggested. Would this be a good case for this lens or can you suggest one better?

A: Yes, the Ruggard Lens Case 10.5 x 4.5 would be more than fine for use with the Nikon AF-S Nikkor 300mm f/4D IF-ED Lens. If you are looking for a better case and you need a hard case, the Beta Shell 5.260 Lens Case, B&H # BELC5260RWP, would be recommended, but the Ruggard case is fine for a soft padded case. Another alternative would be the Lowepro Lens Case 11 x 26cm (Black), B&H # LOLC1126, but the Ruggard case would be of similar quality and would be more economically priced, but the above are alternatives that may work for your usage needs.

Q: 5. For the Nikkor 200-500mm which is a better fit, the 10.5 x 4.5 or 12.5 x 5.5 Ruggard lens case?

A: The Ruggard Lens Case 12 x 5" (Black) would be a better option for the Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens.

Q: 6. Is 4.75" the diameter or the height?

A: The height of the interior dimensions of the Ruggard Lens Case (Black) is 4.75" and the diameter is 4.5".

Q: 7. Will this fit the sony 50 f1.2 GM?

A: Sony FE 50mm f/1.2 GM Lens BH #SO5012GM has dimensions of (ø x L) 3.4 x 4.3" so this will fit the Ruggard Lens Case 4.75 x 4.5" (Black) BH #RULCY14X4.

Q: 8. From the spec sheet, it appears that a Tamron 150-600mm lens would fit this case. Does the tripod foot need to be removed for the lens to fit, or will this bag accommodate the lens with the foot attached?

A: I don't believe the Tamron 150-600 will fit. I recommend the Lowepro Lens Case 13 x 32cm which has an interior 5.5 x 5.5 x 12.5 which is just tall enough and will fit with the tripod foot. At 12.5 high interior it is good fit but there is not any extra room.

Q: 9. Would this case be good for my Canon EF-S 18-135mm or should I go smaller?

A: A better case for the Canon EF-S 18-135mm would be the Ruggard Lens Case 5 x 3.5" .

Q: 10. Is the junior receiver (Female) directly above the mounting pin, or is it offset like the avenger and kupo 4.5 grip heads?

A: It is offset so the gobo will work properly. I like to use two stacked on top of each other. One to hold a silk and the other a negative for OTFs in full sun.