The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments, and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture, making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The flat frequency response is well suited for capturing instruments and general vocals in stage performances, trade shows, houses-of-worship, auctions, lectures, and much more.

A wide variety of colors and connectors are available for use with various wireless transmitters. This version is white and features a 1/8" (3.5mm) locking mini connector for use with Nady wireless transmitters.

Flat Frequency Response    1/8" (3.5mm) Locking Mini Connector    Moisture-Resistant Capsule    Low-Handling Noise    (White)

The EMW lavalier microphone is available in three frequency response types. This version features a flat response for capturing vocals, various instruments, and ambiance.

The square EMW lavalier is available in various colors that virtually render the entire microphone invisible against the skin, allowing you to select the version that is best suited for your application.

The attached cable is made of durable, break-resistant Kevlar for rigorous use without shorts or wear.

The EMW is credited with providing pristine audio with minimal handling and rubbing noise, due to its omnidirectional polar pattern.

This square, moisture-resistant capsule is ideal for use in humid conditions, on skin, outdoors, etc.

Related Questions and Answers

Q: 1. Can I use a second lavalier? I mean a use for an interview where we need two mics.

A: The Zoom F2 BT can only accept one lavalier microphone.

Q: 2. Can you connect usual 1/8 external microphone jack without screw lock into zoom F1?

A: Yes. The screw lock in the picture is just a feature of the included lav.

Q: 3. I have the f1, and I use it a lot as a USB audio interface for live streams. Does the F2 have the same functionality?

A: No, the F2-BT does not have an interface mode.

Q: 4. Is the cable able to be swapped so that the remote is compatible with Canon DSLR's with the 3-pin connector?

A: Unfortunately, no, it cannot. The cable in the Vello Shutterboss Version II Timer Remote Switch for Canon with Sub Mini Connection is built into the remote control. The Wireless Shutterboss, FreeWave, and MicroSync remotes would be the only remotes that allow you to exchange the cable included with the remote after purchase. If you need the wired Shutterboss remote, you would need the Vello Shutterboss Version II Timer Remote Switch for Canon with 3-Pin Connection, B&H # VERCC22, for your needs.

Q: 5. Can you only sync timecode over Bluetooth with the UltraSync BLUE, or can you use a more traditional timecode generator like the tentacle sync?

A: Yes, the F2-BT syncs timecode over Bluetooth, but you do need to pair it with the UltraSync BLUE by Timecode Systems (available separately) in order to receive and write timecode to recorded files, The UltraSync Blue can be used as the master timecode generator to sync with other devices.

Q: 6. How do you monitor the audio? I don't see a headphone jack (unless it's the output?) and it appears as though wireless/bluetooth monitoring is impossible via the app.

A: You can use the output jack to connect headphones for monitoring audio. The F2-BT's Bluetooth is used for app control and timecode which requires the UltraSync BLUE (B&H #ATOMXSYBL1US). If you want to connect Bluetooth headphones, you could connect a separate Bluetooth adapter such as the GOgroove BlueSENSE TRM Bluetooth Audio Transmitter (B&H #GOBLUESENSE) to transmit audio from the F2's output to your Bluetooth headphones.

Q: 7. Due to the large size of the included mic I am looking for a compatible mic with a smaller head. My Senal UTM-86 LAV MIC w/3.5mm-SENN does work, but the audio levels are very low. Could the Rode Lavalier II Omnidirectional Lavalier Microphone with its Operating Voltage or Plug-In Power of 1.5 to 5 V be used with the F2? Will the F2 provide enough power to the Rode to give the necessary audio levels? Or which mic could be recommended?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is compatible for use with the Zoom F2 Field Recorder. The F2 provides 2.5V of plug-in power and any lavalier or headset style microphones that are wired for compatibility with Sennheiser wireless microphone transmitters and can operate with 2.5V can be used with the F2.

Q: 8. I have the Zoom F6, which generates its own timecode, and has bluetooth. Can I sync the F2 with F6 directly, or are they really making me buy some 3rd party device for that?

A: It is not possible to sync the F2 and F6 directly. You will need to use an UltraSync BLUE device by Timecode Systems (available separately) to sync the F2 and F6 to receive and write timecode to recorded files.

Q: 9. Does this work with the Nikon D7000?

A: No. It will not work. You need to use a DC-2 connection for the D7000. This version of the shutterboss will feature the right one:Vello - Shutterboss Version II Timer Remote Switch for Nikon with DC2 ConnectionB&H# VERCN22MFR# RC-N2II

Q: 10. Where all can this mic holder mount besides the top handle (which would be in the way of my hand)? Too bad there are no mounting holes on the available viewfinder; ENG cameras have been having the shotgun mics mounted there on the right to get them out of the way for the shooter.

A: I bought the Small Rig side plate and mounted the mic holder on there. Would definitely recommend it.