The Intelix Liberty DigitaLinx Twin Cat5/5e/6 HDMI 1.4 Transmitter is the transmitting end of the DigitaLinx Media Converter HDMI over category cable extension system. This system is applicable in large rooms and similar installations because it allows an HDMI signal to be transmitted over longer distances than traditional HDMI cables allow. This system can also accept and transmit DVI signals when a DVI to HDMI converter is used. As the transmitter, this unit converts an HDMI signal to be transmitted. On the receiver is a DC input for the power supply which powers the transmitter when connected via Ethernet cable. Cat6 cables are recommended for best performance, especially when distances between the transmitter and receiver exceed 100'.

Cat5/5e/6 to HDMI Transmitter    Transmits HDMI Signals up to 165'    HDMI 1.4 Compatible

Related Questions and Answers

Q: 1. Will this work with the B&H # SHM7 MFR # M7 ?

A: No, the SmallHD 12V-2A US Power Supply for Select SmallHD Monitors produces 12V 2A, and the Shimbol M7 7" Touchscreen 4K HDMI/3G-SDI Video Monitor with 3D LUT Output requires a 16VDC input.

Q: 2. Will this power supply work with the older G2 systems?

A: The Sennheiser NT 2-3-US is compatible with G2 and G3 series receivers.

Q: 3. What is the cable length?

A: With the two parts connected, cable length should come in at approximately 6 feet.

Q: 4. Will this test active HDMI cables, that is, cables with Redmere technology?

A: Thank you for your question. This unit will test all HDMI 2.0 cables.

Q: 5. Does this product work with the HDR 160 headphones?

A: This power supply is for Sennheiser's G3 rackmount receivers and transmitters. Sennheiser's manufacturer part number for the RS 160 transmitter power adapter is 534480.

Q: 6. How much audio power is delivered to earphone jack? Is this paralleled with the RCA jacks?

A: This is a passive box adding no amplification to the signal. The outpit to both the RCA and 3.5mm will be at line level.

Q: 7. My EM300 diversity receiver unit says 300mA input but this power supply says 400mA. Will this still be ok to use?

A: Its fine the adapter will regulate it self to 300ma. This will work.

Q: 8. Comes with EURO plug?

A: It is configured for the USA/North America only. A European adapter is not included.

Q: 9. Can you ship this product to india? Chennai zipcode - 600073

A: You may calculate your actual shipping options/order totals by adding the items you want to a shopping cart. It will then list the shipping options, descriptions, ETA's and fees to your location.

Q: 10. When using this with the Sennheiser DC 2 - DC Camera Power Converter, how do you tell or know that are the negative(-) and positive (+) when soldering?

A: I put a multi meter to be absolutely sure of the polarity. But anyway you will find that the wire that is black with lettering from the power supply will get soldiered to the black with white stripe wire on the fake battery pack. The black with a white strip will be your positive. Your solid black wire will be your negative on both.