Pro Co Sound's RAC-Kables are a practical solution for wiring racks. They are pre-wired on one end with a variety of connectors and pre-cut to 10', 20' or 30' lengths. Just plug them in, run the blunt end to the correct length, cut and terminate. This unique system reduces rack wiring time substantially.

All assemblies use Pro Co AC1; a CL2 rated, and 100% foil shielded cable.

Related Questions and Answers

Q: 1. In the Specs Tab, under "Approximate Battery Life" there are two entries for 48kHz/32bit. Could you please check?

A: In the specifications for "Approximate Battery Life" for the Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder, the first section of entries for 48 kHz/32-bit are for recording 2 channels, while the second section of entries for 48 kHz/32-bit are for recording all channels. These details are shown in parenthesis. For more information, you can view the full listing of the manufacturer's specifications for estimated recording times at the top of page 314 in the user manual: https://www.bhphotovideo.com/lit_files/817190.pdf

Q: 2. Can you overdub with this recorder, or playing 1 track while recording on another track?

A: No, the Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder does not include any overdub functionality.

Q: 3. 3.5 mm mic input available?

A: The Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder does not feature a 3.5mm input onboard. Presumably, 3.5mm microphones can be adapted for connection to the F8n's XLR inputs with a product such as BH #ROVXLRP Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter: https://bhpho.to/37jdBi5

Q: 4. Profoto Pro7 2400W can use?? Pro7 H 43cm..

A: Yes, this case will fit the Profoto generator perfectly. Nearly every rental house in the U.S. uses this case for their Profoto gear.

Q: 5. Will there be a way to reformat SD cards from the app while Bluetooth connection is active?

A: Zoom does not specify the ability to format the SD cards used within the Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder via the Control App. The Control App does allow for other parameters for the SD card to be set, such as file type and input signals recorded to each card.

Q: 6. Are you able to confidence monitor the audio over the bluetooth connection with the app?

A: No. The Zoom F8 Control app for t the Zoom F8n Multitrack Field Recorder allows you to visually monitor the audio levels, but not to listen to the audio via Bluetooth. You will need to use the wired headphone output connection on the recorder in order to listen to the audio.

Q: 7. what's the difference between speed rail and o.d. pipes?

A: O.D. stands for outside diameter. It is a spec for the kinds of pipes it is compatible with. This works with 1.5 to 1.9" O.D. Pipe.

Q: 8. What is your best recommendation for a transmitter to connect to the internal time code BNC out if I need to send the internal zoom F8 timecode to other cameras?

A: Because timecode signals are quite "hot" in nature, a proper wireless system for sending wireless timecode from the Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder to camera would require a transmitter that is able to accept Line level signal. The Sennheiser EW 112P G4 Camera-Mount Wireless System (BH #SEEW112PG4A) is a good candidate for this task: https://bhpho.to/2y5gjmO

Q: 9. What is the width of the track from the center of each pole support?

A: You can order the pipe in any length you want...after 7' you will need support...go to the Dana dolly site they provide you supplier info.

Q: 10. Besides the recorder and the power adapter, what's in the box?

A: The recorder and AC adapter are the only items included in the box.