This 50" long Redrock Micro JST to 2-Pin LEMO flexCable for microRemote Basestation connects a lipo battery with JST style connector to the 2-pin microRemote Basestation power input. This 50" cable is designed for use primarily with MoVI gimbals and allows for the full range of gimbal movement when your lipo battery is mounted on your MoVI's handlebar.

Designed to be 200% more flexible than standard cables, which means easier cable wrangling and less drag when using accessories between the camera and gimbal frame, such as when using a Fingerwheel controller or for power connections.

Connect LiPo Battery to Basestation    Designed for Use with MoVI Gimbals    Super Flexible

Related Questions and Answers

Q: 1. Can I use this to power my Heden Carat resceiver from my Steadicam Zephyr camera stage?

A: Hi JB - we don't have compatibility information regarding use of our cables with non-redrock gear, sorry. I'd suggest checking with Heden on their power requirements, just make sure you know if they use arri standard or US standard polarity (they are opposite of the two) and use the appropriate cable.

Q: 2. Will this work with a Tera deck?

A: Yes it is :)

Q: 3. Is this 3pin lemo connector compatiple with the 3 pin lemo port on the Steadicam Zephyr which is an 12-24v EGG-0B-0303?

A: Hi JB - thanks for asking. This cable is designed for the powerPack to power barrel connector devices such as compatible smallHD monitors.I think we saw a similar question coming from you earlier, so if you are looking for a custom cable you might drop us a line directly and see if we can solve your problem.

Q: 4. will the thumbwheel mount onto the Movi Pro ring?

A: HI Derekyes, you will just want to add the universal clamp adapter and you are good2-136-0002 Collins Clamp microRemote Fingerwheel Upgrade $85

Q: 5. I want to use this on the Dji Ronin M, What else do I need to buy to make this work? Just a Ptap Cable to power it from the Ronin M? I basically want to be able to be a single operator with the thumb controller. Where Can I find out what all I need to make this work. I live in South America and do not want to have to order some other part after the fact. Thanks for any information as I am looking for a solution for one man operation with a ronin m, a7sII an Loxia lens. I know I need the gear straps for the lens, but is there anything else I need? Extra plates,arms or anything for the ronin to get this set up and work, Plan on using a smallhd502 on the ronin handles. Thanks for any information.

A: Hi EricThere's a lot of ground to cover there. what I recommend is picking up the remote fingerwheel bundle without cables, and get the DJI specific cable pack:a href= http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html target= _blank http://www.bhphotovideo.com/c/product/1140914-REG/redrock_micro_8_114_0011_microremote_handheld_fingerwheel_bndle.html/aa href= http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html target= _blank http://www.bhphotovideo.com/c/product/1111304-REG/redrock_micro_8_100_0007_dji_ronin_microremote.html/afor mounting the motor, you'll want the rhino mount, probably 4 a href= http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html target= _blank http://www.bhphotovideo.com/c/product/1176779-REG/redrock_micro_2_167_0002_rhino_mount_shoe_mount_clamp.html/afor lens gears, you might be best to go with a kit that covers all possible lens sizes (though loxia are typically A or B sized lens gears)a href= http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html target= _blank http://www.bhphotovideo.com/c/product/748784-REG/Redrock_Micro_8_003_0107_microLensGears_Kit_4.html/aFor mounting the 502 monitor, you can look at the billie ball mount as a low profile ball mount that attaches to the DJI accessory platea href= http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html target= _blank http://www.bhphotovideo.com/c/product/970766-REG/redrock_micro_2_138_0001_billie_ball_mount.html/ahope that helps

Q: 6. Will this work with the Zacuto Gratical Eye?

A: Yes, Its workink

Q: 7. Can this rig work with the Ronin M?

A: Yes the Redrock Micro microRemote Handheld is so compact it is designed to work on stabilizers as well as conventional set-up's.

Q: 8. are both connectors Pin-1 +VDC? Thank you.

A: If I understand your question, you want Pin-1 to be +VDC. The answer then would come from what power source it is connected to. If that is Pin-1 +VDC, this would be as well.

Q: 9. Will this kit be shipping with the Flex cables?

A: It is a new item so we cannot confirm at this time but we feel confident that what you see is what you will get including the three cables.

Q: 10. Will this power the Red Komodo and Cine 7?

A: The Red Komodo and the SmallHD Cine 7 both have a 2-pin LEMO power connector, so in theory it should work. However with out testing I cannot confirm. This cable is described to power an optional Redrock microRemote.