The cocoa E6 Directional Earset Mic, Highest Gain, with Detachable 1mm Cable and Hirose 4-Pin Connector for Audio-Technica Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a Hirose 4-pin connector for direct connection to an Audio-Technica ATW-T35, ATW-T75, ESW-T211, ATW-T601, ATW-T701, AEW-T1000, AEW-T1000a, or ATW-T1001 wireless bodypack transmitter for use with 600 Series, 700 Series, 1000 Series, 1200 Series, 4000 Series, 5000 Series, 7000 Series, or System 10 wireless systems.

For Vocals and General Speaking    Detachable 1mm Cable    Hirose 4-Pin (AN), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Will this work with the EOS R5?

A: Yes, the Canon DC Coupler DR-E6 would be compatible for use with the Canon EOS R5 Mirrorless Digital Camera.

Q: 2. I do not see a hole for the power cord on the 5D Mk IV - guessing I need to a slight door modification?

A: The opening for the power cord on the Canon EOS 5D Mark IV DSLR Camera is covered by a rubber flap on the edge of the battery door (located on the inner side of the camera grip).

Q: 3. Does this work for the new Canon EOS R?

A: Yes, the Canon DC Coupler DR-E6, does work with the New Canon EOS R.

Q: 4. Can I use this to power a small HD 502 bright in to a 12 volt port?

A: the monitor is powered by the LP-E6 battery. There are several manufacturers of the dc couplers

Q: 5. Will this battery work for my BMPCC 4K w/o a grip. I'm having trouble finding just the batteries for the camera. Hopefully this is the one !

A: Yes, Blackmagic Design Pocket Cinema Camera 4K takes any version of the LP-E6 batteries. Blackmagic Design LP-E6 Battery is a replica of the Canon original LP-E6 lithium pack therefore is fully compatible with camera.

Q: 6. What size is the barrel connector, 2.1 x 5.5mm?

A: Yes, the barrel connector of the LanParte E6 Battery Dummy Pack (B&H# LAE6P01) has a 2.1mm center pin and can accommodate a barrel connector that has an outer diameter of 5.5mm.

Q: 7. Will this coupler work with the AC adapter (brick) that comes as part of the Canon ACK-E4 AC Adapter Kit (for 1D3, 4, and X)? I already have several of those, so would like to just add the coupler (to fit a 5ds) rather than buy the whole ACK-E6 kit.

A: No, it will not work with the ACK-E4 AC adapter.

Q: 8. Does this have a voltage regulator in it? I want to plug it into an Arri Alexa 3 pin which outputs 24-27v. IOW can I use a higher Voltage battery as the source such as a V-Lock (14.4v)

A: This dummy battery does not have a regulator. If you'd like to use A mount or V mount battery for continuous powering, please use it with LanParte Battery Pinch. The Battery Pinch is voltage regulated and offers several powering jacks with different voltage outputs for different gears.Please check out LanParte VBP-01 VBP-02 VBP-03(for V-Mount) or ABP-01(A-Mount)

Q: 9. What size/spec is the DC plug on this adapter?

A: The size/spec is not listed. According to Landparte, it is a standard interface. Once in hand it should be easy to determine what size it is. It would be one of the sizes listed on this page. a href= http://wikipedia.org/wiki/Coaxial_power_connector. target= _blank wikipedia.org/wiki/Coaxial_power_connector./a Unfortunately is it not possible for us to pull stock from the warehouse to determine what the size is.

Q: 10. Does this work with the CANON 6DMKII?

A: The Canon 6D Mark II uses the LP-E6 Battery System. This dummy battery should work well with that camera.