Sold as a pair, the white JBL Control 19CST is a passive 8" in-ceiling installation subwoofer with a multi-tap transformer designed to deliver reliable low-frequency reinforcement for foreground music systems in a variety of venues ranging from boardrooms to bistros. When driven by 70V/100V power amplifiers (available separately), these subwoofers provide a program power capacity of 200W. Each Control 19CST is equipped with a durable 8" polypropylene woofer capable of covering the low-frequency range from 42 to 200 Hz.

The Nested Chamber design and Linear Dynamics port yield extended bass response, high output, and sonically transparent acoustic low-pass properties. The removable locking connector, C-shaped support backing plate, tile support rails, cutout template, and paint shield contribute to easy installation.

Passive Design    8" Polypropylene Woofer    200W Program Power Capacity    For 70V/100V Power Amplifiers    Multi-Tap Transformer    42 to 200 Hz Frequency Range    Removable Locking I/O Connector    Includes Cutout Template & Paint Shield

Low-profile, in-ceiling installation subwoofers with paintable baffles and grilles

Includes cutout templates and paint shields for ease of installation

Multi-tap transformer enables use with 70V/100V constant-voltage systems

Ideal for reinforcing full-range speakers for foreground music systems

Discreet, minimized visual impact for boardroom, reception areas, restaurants, airports, and retail applications

200W continuous program power handling performance

Durable 8" polypropylene woofer with vented pole piece for low distortion

42 to 200 Hz frequency range

Nested Chamber design delivers high output from a compact enclosure, while its acoustic low-pass character enables it to augment a full-range sound system without an external crossover or separate amp channel

Linear Dynamics port design, originally developed for JBL's concert speaker systems, produces extended and deep bass output

Front-panel rotary switch selects tap setting for the 70V/100V multi-tap transformer

Removable locking connector with screw-down terminals for input and loop-through output connections

Enclosed terminal box provides strain relief for use with plenum-rated wire, 1/2" conduit, or flexible conduit up to 7/8" outside diameter

Back-panel attachment loop acts as a secondary support point

Related Questions and Answers

Q: 1. When having 8x Hyperdeck Studio Mini Recorders connected to the Extreme Control will I be able to do Instant sports replays live?

A: The Extreme Control has no special replay capabilities. You would need third party software or hardware for that.

Q: 2. Will this work for the Genray 18 inch full moon?

A: No this will not fit

Q: 3. Is this compatible with the C300 iii?

A: No this will not work with the C300MKiii

Q: 4. There is a firmware update for this handle- how do you update it?

A: In order to update the DJI tethered control handle for RS 2. Please follow the following steps. 1. Make sure that the DJI Ronin app is the latest version when updating the firmware. 2. Update the firmware using the DJI Ronin app by connecting the gimbal via Bluetooth. 3. Follow the step by step wizard assistant.

Q: 5. Is this compatible with the Red Komodo?

A: Yes, you will need a 7-pin to 9-pin cable to connect the two.

Q: 6. Is there longer cable?

A: Longer cables for the DJI Tethered Control Handle are not available separately. However, the DJI Ronin Expansion Base Kit includes control cables that are 5m long.

Q: 7. Is there a wireless version of this? One that could be remotely operated by an AC while Cam Op is a couple feet away?

A: The DJI Tethered Control Handle for RS 2, must be connected to the RS 2 gimbal, via a wired adapter. There is currently no wireless alternative, except for the DJI Ronin mobile app.

Q: 8. Do these come with the connector dowels?

A: The Glide Gear XSY 101 - 4ft Aluminum Track Extensions come with everything required to extend Glide Gear track. Review this Image: https://bhpho.to/4g7tAPi

Q: 9. Is the $269.95 comes as all photos shows one handle controls with cables and all other accessories plus the two arms with the second handle as last photo shows

A: The following item is comes enclosed with the following DJI Tethered Control Handle for RS 2 NATO/RSA Expansion Adapter Control Cable (11.8") Limited 1-Year Warranty

Q: 10. Will this work with C300?

A: Sorry Shopper, this Wooden hand grip is compatible only with the camera models mentioned in the name of the product.