The Tiffen 3 x 3" 1/2 Coral Soft-Edge Graduated Filter helps to specifically add a warm, pale orange coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 1/2 color density provides less coral coloration than the 1 density, but more than the 1/4 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 3" / 76.2 x 76.2mm.

1/2 Density Color Graduated Filter    Coral Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a natural-looking warming effect to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Will this work with a Canon R6? And how long would the battery last?

A: Yes it will. You should get several hours of battery life.

Q: 2. will this work with canon 5d mark iv?

A: Yes, you will just need the LP-E6 dummy battery. We have a kit that includes they dummy battery and a power charger. https://bhpho.to/37IPA29

Q: 3. Does anyone know the barrel dimensions of the 8.4V power jack? I need to create a cable for a dummy battery and my other power cable plugs are too large.

A: According to CoreSWX, the center pin is 1.0mm, the inside space is 3.3mm, and the outer connector diameter is 5.5mm. https://www.elliottelectronicsupply.com/3-3mm-x-5-5mm-dc-power-plug.html

Q: 4. How do you put the battery into storage or off mode?

A: Hold the LCD backlight button for 20 seconds to awaken and to put back into "Storage mode."

Q: 5. Will it work with Sony A7s?

A: This model will not work with the Sony A7S. You will need: Core SWX Powerbase EDGE Battery with NP-FW50 Cable & D-Tap Charger https://www.bhphotovideo.com/c/product/1403143-REG/core_swx_pbe_a7_powerbase_edge_small_form.html

Q: 6. I'm concerned that in a run and gun situation the base will become loose. Does the base stay secured to the camera?

A: B&H # (this item) COPBEBMPC4 will stay secure. The base has a locating pin that prevents the unit from turning. It will remain intact during run and gun and the rigors of location production.

Q: 7. Pls tel me charging time of the Powerbase?

A: It takes 2-3 hours depending on the amount of discharge.

Q: 8. can it work with the following product? : https://www.bhphotovideo.com/spanish/c/product/1276803-REG/lanparte_lp_e17_battery_dummy_pack.html

A: The Lanparte LP-E17 dummy battery pack will not work with this Powerbase EDGE for the Blackmagic Pocket Camera 6K & 4K since the size of the female barrel connector on the Lanparte is 2.1/5.5mm and the powerbase uses a 2.5mm barrel connection. While both are 7.4V, a two male ended cable with the two different sized connections has yet to be found.

Q: 9. Does it works for use with Zacuto Gratical Eye EVF?

A: Yes, you can use a d-tap to 2-pin LEMO adapter for power. Zacuto makes a compatible adapter cable: https://bhpho.to/2CHhuxu

Q: 10. What are the dimensions of the male barrel plug on the dummy battery and the female connection on the battery? I need to extend the length of this cable.

A: The size is not listed. However Core SWX offers the Powerbase Edge Cable Extension (18"), B&H # COPBECEXT. If you need to extend the cable for the dummy battery with this product, this is the part you will need. https://bhpho.to/2VWbkTB