You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Rdl Sas-hc8 Headphone Control Station

Rdl Sas-hc8 Headphone Control Station
  • Product Code: ga216635
  • Availability: In Stock

$1,301.76 $2,030.75

The SAS-HC8 Headphone Control Station from RDL is a SourceFlex headphone listening station that can be used with exercise equipment, on a tabletop, or any other area where you want to permit people to access multiple channels of audio. Mount it to a pipe, counter, or a handlebar, among many other installation possibilities.



It features a source selector with a digital numeric indicator, as well as volume adjustment buttons. These control buttons on the front panel are sealed to protect them from moisture and other foreign debris. When headphones are unplugged from the unit, the audio volume is automatically reset to a reasonable level to prevent aural injuries to future users. This unit is housed in a rugged metal case.



Bracket with clamps are included with the controller, allowing you to mount it to a flat surface or to tubing 0.75 to 1.5" (1.9 to 3.8cm) in size. This unit belongs to RDL's Ultrastyle family of products, a series that emphasizes both design and function.

Parameters
ConstructionMetal
FinishGranite
Input6-position terminal block
Output(2) 1/4" (6.35mm) headphone jacks
(1) 1/8" (mini) headphone jack
Display7-segment red LED
(0 = off or paging; 1 through 8 = selected channel)
ControlControl buttons: replaceable, protected by moisture-resistant polycarbonate
Controls:
Momentary button channel SELECT
Momentary button volume ramp UP
Momentary button volume ramp DOWN
Control signals:
DC (RAMP and CONTROL conductors between remote station and controller)
Ramp Rate5 seconds nominal for 40dB audio level adjustment
Frequency Response50Hz to 35kHz (+/-1dB)
THD & Noise< 0.1% (20Hz to 20kHz) @ 1kHz
Amplified Output200mW RMS into 100Ω, adjustable
(normal system audio input operating level applied)
DimensionsNot specified by manufacturer
Packaging Info
Package Weight3 lb
Box Dimensions (LxWxH)4 x 2 x 2"

Use this headphone control station to provide multiple channels of audio in almost any installation configuration that you can imagine.

This unit features controls to change the channel and the volume of audio.

The controls on the front panel are sealed to protect them from moisture and debris.

When headsets are unplugged from the controller, the volume is automatically reset to prevent injury to future users.

This unit is housed in a metal case, ensuring years of reliable use.

Related Questions and Answers

Q: 1. Can this be used to upgrade Sigma Sony lenses?

A: No, the Rokinon Lens Station for Sony E is only for specific Rokinon E mount lenses. It does not work with Sigma brand lenses.

Q: 2. Will this work with the 600d pro?

A: Yes, the Aputure 2-Bay Battery Power Station (V-Mount) is designed for the Aputure LS 600d Pro Daylight LED Monolight (V-Mount).

Q: 3. i want to run a smallrig rc 350 light with this product. has a 48v dc input. Is it possible with the right connectors?

A: Yes the Aputure 2 bay power station will allow for 48V DC out - you just need to connect via a cable from that 48v output port.

Q: 4. How is this different than the power supply that ships with the 600d?

A: This product only provides power to an Aputure light via 3 pin XLR and dual V mount batteries. The power supply shipped with the LS600d gives you AC power, battery power and control the effects/dimming on the light.

Q: 5. Will this station work on non-aputure lights?

A: This unit was designed specifically for the Light Storm 600d & Nova 300

Q: 6. Will the SmallRig VB99 Mini V Mount batteries work on this?

A: SmallRig VB99 Mini V-Mount Battery (99Wh, Black) is not compatible with the Aputure 2-Bay Battery Power Station (V-Mount).

Q: 7. Will this station power a haze machine of 188W 1.5A 250V or 1120W 8.1A 250V ?

A: With no DC input it will not work

Q: 8. Will this allow the 600d work at full power?

A: This device will output 48v @10amps. That is 480w. That is less than a 600d at full power.

Q: 9. does this adaptor working RF LENSE SAMYANG????????

A: No. This Samyang EF lens station is for EF-mount Samyang lenses.

Q: 10. Can you power this unit via AC power? Does it come with an adapter to do so?

A: This is a battery adapter it is not AC capable.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Whirlwind Ths 1m Talkback Headphone Box

$1,215.00 $1,798.20

Tiffen 58mm Pro-mist 3 Filter

$191.97 $282.20

Fsr It-vcm Stereo Audio Volume Control Module

$790.50 $1,169.94

Rolls Ilc19 In-line Level Control

$207.00 $320.85

Products You May Like

Bright Tangerine Top Plate For Canon C70

$585.09 $819.13

Chrosziel 100-80mm Insert Ring (for Film)

$210.00 $319.20

Feisol Elite Tripod Ct-3372l M2 Rapid

$2,369.85 $2,843.82