The TX-LC2 Unbalanced to Balanced Line Combiner from RDL is a device that allows you to perform isolated mixing on (2) unbalanced line-level audio sources and feed them to a balanced or unbalanced audio line. Output from this unit is a mono mix of the stereo signal and gain of the combined signals is adjustable from unity to 14dB.

Input circuits on this unit are high-impedance, line-level, and isolated. These features allow the module to bridge an unbalanced stereo source without affecting the stereo separation. The mixing circuit on this module is an active summing amplifier.

This module allows you to perform isolated mixing on (2) unbalanced line-level audio sources and output them to a balanced or unbalanced audio line.

The unit outputs a mono mix of the stereo signal and gain of the combined signals is adjustable.

Input circuits on this unit are high-impedance, line-level, and isolated.

Related Questions and Answers

Q: 1. Does the Yongnuo YN560-TX PRO work with the canon EOS M50 camera

A: Yes, but we highly suggest using Godox system as it offers a bigger echo system. Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC • MFR #XPROC https://bhpho.to/2EoHkHG Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC • MFR #X1R-C https://bhpho.to/3IhRs4e

Q: 2. Does this stereo unit support turntable devices?

A: The TX-SR393 does not have a phono input for direct connection to a turntable without an internal preamp. If the turntable has an internal preamp, you can use it directly with one of the RCA stereo inputs on the back of the TX-SR393 receiver. If the turntable does not have an internal preamp, then you would need to use a standalone phono preamplifier between the turntable and the TX-SR393 receiver, like BH #BEVP549 or B&H # ROVP29 for example.

Q: 3. this unit can shot 603 radio series ????

A: This unit does work with YN 603 transceivers.

Q: 4. Will I be able to control power and zoom on Nikon SB-600 and sb-800 flashes with this unit?

A: No,this transmitter is compatible with a variety of equipment, including YN200 and YN862-series Speedlites and the 560/660/720/860/603/605 triggers

Q: 5. I know this works with Nikon DSLRs, but how compatible is this with Nikon z6 ii?

A: This transmitter has not been tested with the Nikon Z6 II to our knowledge, so the results may vary when using the two together.

Q: 6. Hi there, Can yongnuo YN560-TX PRO control YN968N ?

A: Yes this controller can fire the YN968N.

Q: 7. will a Sony A7R mk3 hotshoe trigger this unit? I'm ok with or without TTL

A: This unit has a metal shoe that can cause issues with the Sony shoe. It would be best to use a transmitter like the Godox XPro that has a plastic for specifically made for Sony shoes.

Q: 8. Does this also have a power output and can it power a small camera?

A: Yes, this does have the power output just like the standard Focus monitor. It will work with dummy batteries like the SmallHD FOCUS to Canon LP-E6 Power Adapter, BH #SMPADCBTLPE6. https://bhpho.to/3k6PlBR

Q: 9. Anyone know how the YN560TX-Pro must be configured? It is suppose to work as a YN622TX, but I cant get it to work with the YN685 in Ttl 622 remote mode. Manual says to upgrade firmware, but the pc program from the webpage is not detecting the YN560TX-Pro and the flash YN685 can only be upgraded via wireless from the transmitter connected to the pc. Is the update still not out or do I have to put some special configuration on my pc? What flash models are confirmed to work with this controller in ETTL?

A: The device is compatible with YN200 and YN862-series Speedlites and the 560/660/720/860/603/605 triggers.

Q: 10. Can this monitor receive signal from a Teradek Ace 500 TX?

A: Yes, the Focus Bolt Sidekick RX can receive a signal from the Teradek Ace 500 TX.