The RDL ST-PH1 Stereo or Mono Phono (Turntable) Preamplifier features a compact, stick-on design ideal for commercial audio installations. The ST-PH1 will accept mono or stereo phono signals and is capable of balanced or unbalanced output. There are screw terminal connections.

The power supply input may be fed from a floating (not ground referenced) 24 Vdc power source, from a bipolar power supply (+/- 12 VDC or +/- 15 VDC) or from a ground referenced 24 VDC power supply.

Compact Turntable Preamplifier    Screw Terminal Connections    Balanced or Unbalanced Outputs    Left or Right Output Adjustment

Stereo or Mono Phono Preamplifier

Balanced or Unbalanced Outputs

Accurate, Low Noise Preamplification

Outputs Drive Hi or Low Impedance Lines

Adjustable Left and Right Output Levels

RDL SupplyFlex Power Input Configuration

Related Questions and Answers

Q: 1. Will this work with a Hasselblad x1dii to connect a canon flash trigger to a Profoto B10?

A: Yes, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is compatible with the Hasselblad X1D II.

Q: 2. I saw that you responded that this will work with a Leica Q3. please confirm that it will also work with a Leica M6?

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection has a center pin connection. It will work on any hot shoe with a center contact like the Hotshoe on the Leica M6 Rangefinder Camera.

Q: 3. Where is speaker out needed to wire to channel selector?

A: Hi Aaron, thank you for your inquiry. This is a 2-channel receiver only. The speaker terminals is located at the rare panel. Please check the manual for reference: https://docs.sony.com/release//Manual_4726907111.pdf Regards, Erin

Q: 4. What is the output impedance of the headphone jack? I'm wondering I will need a separate headphone amp.

A: The output impedance is not provide by the manufacture for the Sony STR-DH190 Stereo Receiver BH #SOSTRDH190.

Q: 5. What generation of the Bluetooth?

A: Based on the Bluetooth feature set i would have to agree with version 4.2.

Q: 6. I need to attach a stereo microphone to the multi function sony rx100 ii m2 shoe. will this connector xfer the stereo from mic?

A: No, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is not use for a mic and is not a stereo connection.

Q: 7. will this work for nikon f2 ?

A: Yes, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will function on a Nikon f2 Film Camera.

Q: 8. Will this work with a Profoto a10 flash? I would like to use it on a hasselblad 503cw. Thanks

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection will allow the Profoto A10 AirTTL-N Studio Light to sync at the center contact of the hot shoe and trigger in manual mode. The Hasselblad 503cw camera series do not have a port or a hot shoe to connect this adapter. Instead, you will need a lens with the sync port and a PC male to PC male sync cord.

Q: 9. I have a Canon 7( no accessory shoe, 1960's rangefinder) and a Godox TC330 flash, will it work?

A: No, the Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection would not work in usage with the Canon 7 Rangefinder and the Godox TC300 Studio Flash Light.

Q: 10. Will this work with Olympus om1

A: The Vello Universal Hot Shoe Adapter with 3.5mm Mini Phono and PC Connection is indeed compatible with the Olympus OM-1.