The L Series LR Camera-Mount Wireless Receiver from Lectrosonics is a digital hybrid ultra-compact portable wireless bodypack receiver with 75 MHz tuning bandwidth and with tracking front-end filters. When paired with a transmitter and microphone it can be used to capture audio in environments for applications such as broadcast TV, video production, ENG field work, and more.

The LR has several other features to help provide good clear audio, such as compatibility modes to allow the receiver to operate with older analog receivers. Dual antenna diversity helps to improve range and resistance to dropouts. There is also a built-in RF spectrum analyzer and SmartTune scan, which make finding a clean frequency on-site quick and easy.

In addition, the LR receiver is enclosed in machined-aluminum housing and built with detachable antennas that allow for remote antenna mounting. LCD and membrane switch interfaces provide clear information for setup and status monitoring. This transmitter operates in the A1 frequency band between 470.100 to 537.575 MHz.

For Broadcast, EFP and ENG Applications    75 MHz Tuning Range    Digital Hybrid Wireless    Diversity Reception    Tracking Front-End Filters    2 x Detachable Antennas    LCD Backlit Screen    Rugged Machined-Aluminum

Related Questions and Answers

Q: 1. It is possible to combine a Lectrosonics L-Series LMb (B1: 537 to 614 MHz) with a UCR 411A?

A: Yes, the LMb transmitter can be used with all Lectrosonics Digital Hybrid Wireless receivers including the UCR411a when the compatibility mode for the transmitter and receiver are both set to the "Nu Hybrid" compatibility mode. Lectrosonics notes that if your receiver does not have Nu Hybrid mode, then set the receiver to the "Euro Digital Hybrid Wireless" compatibility mode.

Q: 2. Where can I find a holder for my Sony camera for this receiver?

A: https://www.bhphotovideo.com/c/product/1095137-REG/lectrosonics_lrshoe_receiver_mount_kit.html/overview?sts=pi&pim=Y

Q: 3. Can you use this with a SRa receiver

A: So long as your SRa receiver has the same frequency ranges as the LMb transmitter, the LMb transmitter will work with an SRa receiver.

Q: 4. Smart phone spplications

A: The Lectrosonics LR Receiver can be connected to a smartphone using the included 1/8 output cable along with an optional adapter such as the Rode SC4.

Q: 5. Do non servo ta5f connectors work with the lmb transmitter?

A: Yes, the Lectrosonics L-Series LMb Bodypack Wireless Transmitter and all other Lectrosonics transmitters with 5-pin inputs have servo bias inputs that can also be used with other conventional wiring configurations.

Q: 6. is this compatible with Zoom F8N?

A: This wireless receiver can be connected to an input of the Zoom F8N digital recorder, but it does require to be paired with the L Series LT Bodypack Wireless Transmitter (A1: 470 to 537 MHz), BH #LELTA1.

Q: 7. Is IFBT4 block 19 compatible with the A1 receiver, will the frequencies match up?

A: Yes, the Lectrosonics IFBR1B Bodypack IFB Receiver with Charger (A1: 470 to 537 MHz) is compatible for use with the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter (Frequency Block 19), which covers 486.400 - 511.900 MHz (B&H # LEIFBT419). It can also be used with the Lectrosonics IFBT4 Frequency-Agile Compact IFB Transmitter (Block 470), which covers 470.100 - 495.600 MHz (B&H # LEIFBT4470), and the Lectrosonics IFBT4 Frequency-Agile IFB Transmitter (Frequency Block 20), which covers 512.000 - 537.500 MHz (B&H # LEIFBT420).

Q: 8. Is this receiver compatible with the Lectrosonics WM transmitter?

A: Yes. Just select the band that covers the block that the WM is in. A1 covers blocks 470, 19, and 20. B1 covers blocks 21, 22, and 23. C1 covers blocks 24,25, and 26.

Q: 9. Can you have one transmitter going to multiple receivers?

A: Yes, that is possible, you just need to have the receivers tuned to the same channel and frequency band.

Q: 10. Is it compatible with Sennheiser G4 transmitter?

A: No it is not. Do not mix and match brands.