Design Your Own Otterbox Phone Case

Fiberbilt By Case Design 6x19" Padded Partition

Product Code: ga216870
Availability: In Stock

$28.50 $40.47

Qty

14 reviews Write a review

Description
Reviews (14)

The Fiberbilt PP6x19 Padded Partition is a divider used to provide additional adjustable space for a Case Design Fiberbilt 8" deep Adapt-A-Case. It is an interlocking divider made from 1/8" Masonite with foam padding.

Parameters
Color	Gray
Attachment Method	Proprietary
Materials	Exterior: Masonite Interior: Foam
Dimensions	Exterior 19 x 6" / 48.26 x 15.24 cm (Overall)

Adjustable space to fit your equipment

Interlocking, foam-padded partitions

Padded side walls

Case Design Fiberbilt P20D, P20J or P40Q Adapt-A-Case

Related Questions and Answers

Q: 1. Can 22" fit a Manfrotto Nano light stand MS0490A? MS0490A is 1cm longer than Manfrotto 5001B Nano light stand in collapsed height.

A: Yes, it will fit.

Q: 2. Is the interior of the bag at least 8" in width? I have a SVBONY sv503 102 lens I want to use this bag for.

A: Ruggard Deluxe Padded 27" Tripod Case interior width is 6.0''. However, it is not a rigid case, therefore, it will expand so you can accommodate equipment slightly wider than the bag. The Ruggard Deluxe Padded 48" Tripod Case interior width is 7.5''.

Q: 3. What is the interior diameter of both the top and bottom of the Ruggard Deluxe Padded 42 Tripod Case (it has a tapered shape)?

A: Be forewarned: I just got this case which looks really great. Unfortunately, the interior measurements in the description are inaccurate. It literally tapers to just 3 inches wide EXTERIOR dimension at one end! The interior dimensions listed in the specs are H: 9.0 x W: 7.0 x L: 42.0" . My Manfrotto 645 CF legs don't even come close to fitting so I must send it back.

Q: 4. Will a RRS TVC24 with BH40 fit in this bag?

A: Yes, the RRS TVC-24 equipped with the RRS BH-40 head can fit into the Ruggard Deluxe Padded 27" Tripod Case.

Q: 5. Will this 35" case hold both my Manfrotto P&T Head MHXPRO-3W & MT190CXPRO3 CF Tripod? If so, would it be only with them joined?

A: Your tripod and head combination is about 29.5 inches long so the Ruggard Deluxe Padded 35" Tripod Case would fit your tripod and head attached with room to spare. This ProAm would be a better fit: https://www.bhphotovideo.com/c/product/1631293-REG/proam_usa_tribag32_32_carrying_padded_bag.html

Q: 6. My new Tripod is 75 at max height, and 31 folded, would this bag suit my tripod?

A: As long as the height and width are big enough, length should be fine. I use the deluxe cases for many different applications and really like them.

Q: 7. Anyone using a 42" bag with 42" Impact light stands? Just curious if a folded 42" stand will fit within 42" bag. Thanks

A: Yes, the Ruggard Deluxe Padded 42" Tripod Case (Black) will accommodate the Impact light stands that are foldable to 42".

Q: 8. Is this case suitable for airline baggage shipping?

A: The bag is suitable for check in luggage, but it's soft padded, so it really depends what you put inside it. I have a heavy duty slider stand, so I'd be happy with that. If you're worried perhaps you could consider a hard case.

Q: 9. 2 ANSWERSWill a Manfrotto MT190X3 with MVH500AH tripod head fit in this bag?

A: My advise would be to measure all the components to see what will fit and what will not.....

Q: 10. 1 ANSWERSWould to a Feisol CT 3372 fit in the 27 bag?

A: Probably. Check the specs to make sure

Janet	03/09/2024
For the price -well made bag-time will tell how it holds up. 5

Robert	14/07/2024
Exactly what I needed for my short background light nightstand. great value. B&H always gives great service. 5

John	12/07/2024
I have several stands, tripods, bars that were a pain to transport and set up and now I was able to fit most of them in this bag and I will order another soon. the 42 is perfect for some of my longer stands. The padded bag adds an extra level of protection for my gear. So far is great. 5

Lee	04/07/2024
It fit for my item. I love it. 5

Juan	04/07/2024
well put together case for the price 5

Ken	21/06/2024
I bought the Ruggard BP-2027 case in 2014. I've taken it on airplanes and all over; it took a lot of beating and it has held up. It's a well-made bag, and I like it, but it's but very bare-bones. The outside zippered pocket is very thin and doesn't hold much more than a wired release, some small tools, bungee cord, some paper. The bag is padded and has a shoulder strap which is thin and permanently attached. However, for my slider, I wanted a (second) bag with some extra space for accessories. So I purchased the BD-3027. It's a nice bag, also padded. It has a shoulder strap which is removeable. The outside pocket is much bigger than the 2027; it's about two inches deep. I can keep a TurnsPro in it, but it's a bit of a squeeze, but it fits. The outside pocket has a divider; in fact, my goal is to fit two Turnspros in there, so that's a nice feature for me.� It has a little slot for name tag or business card on the outside for identification. Overall, two well made bags for a good value; choose which one depending on whether you care about a detachable shoulder strap, and larger secondary storage for accessories. If you're only carrying a tripod with no accessories, the 2027 is fine. The 3027 might be the answer if you're carrying more gear. 5

Saul	15/06/2024
Perfect size and shape for my new tripod. Very satisfied with this purchase. 5

Louis	05/06/2024
These bags are some of the most durable I have ... I like them. 5

Gary	05/06/2024
Just received today and I think this case is just the ticket. I'm able to fit an folded stand (26.2" / 66.5 cm) with a speedlite bracket attached. The side pocket fits a Bolt P12 Compact Battery Pack. (This case could be improved if it had a detachable strap and an interior pouch or two). Good price. 5