The JIB/C Jack In The Box One-Channel Input Expander from Galaxy Audio is a device that allows you to add an extra channel to your powered monitor when all other inputs are in use. It also permits phantom power to go to both microphones if it is available from the console. Use this convenient and economical unit to expand input capacity without replacing your existing equipment.

There is a 10dB loss in summing microphone when using this device. It is best to sum microphone in the same sound field to compensate for this effect.

Use this device to add an extra channel to your mixer or console.

This device permits phantom power to go to both microphones if it is available from the console.

Related Questions and Answers

Q: 1. When looking at photo #3 (i.e. the camera mounting plate) I see it is attached to the left side of the arm. I have one particular situation where I need it to be on the right side of the arm... I'm shooting a parade from a sidewalk on the south side of the street, with camera facing west. For this event, I need my camera facing in the opposite direction. So, my first question is, is it possible to flip the camera bracket over 180 degree, and at the same time, rotate it so that it faces to the right, instead of the left. Hope I made that clear enough.If that won't work, I have a Bescor MP-101 Motorized Pan Tilt Head that I could mount on the camera plate in it's default configuration, BUT, would the height of the Bescor MP-101 allow a camera (Canon XA-10 or Canon G30) mounted on top of it to clear the arm, hardware, etc., so the camera could face to the right?

A: According to ProAm: The camera bracket could be switched to the opposite side, but it would involve moving the handle to the opposite side as well, which would take some time and tools. I think the best solution would be, using the DVC210 with the boxy camera mount, attach your Bescor Pan Tilt Head and the camera on top of that. With the Extension Plate of the DVC210 added to the camera mounting bracket, he or she could even mount the Pan Tilt and camera in an upside down position. If you have further questions, please email us at provideo@bhphoto.com.

Q: 2. Will this mini-jib support the panasonic ag-ac90?

A: Hello, I don't know if you received an answer yet... But the reported weight of the ag-ac90 is 3.3-3.9 lbs. According to genus tech the max camera Weight is 9.36 lbs.

Q: 3. Will this work with the Red Komodo?

A: No, DZOFilm Marlin 1.6x Expander for PL Lens to E-Mount Camera would not be compatible with the RED Komodo's Canon RF mount.

Q: 4. What Dollies work well with this besides their spider dolly?

A: The Porta-Jib 40' FlexTrak for Spider Dolly is designed to work best with Porta-Jib Dollies which it was designed for like the Porta-Jib 3-Leg Spider Dolly (Track Wheels) BH #POSP3T https://bhpho.to/2OgUQ3R

Q: 5. Do you also include a tripod and rail?

A: This is just for the track. It does not include anything else.

Q: 6. Does the maximum payload include the weight of the counterweights, or just the camera and head? Could the jib conceivably carry ~80lbs of combined payload of 30lbs of camera and head, along with the 50lbs (guess) of counterweight?

A: The max payload would be 44 lb for the Konova SUNJIB. This would not include counterweights. However, The optional tripod that carries the Jib and counterweights would need to be able to hold the total weight.

Q: 7. Can I use full frame lenses?

A: The DZOFilm Marlin 1.6x Expander for PL Lens to E-Mount Camera is designed for S35 lenses and not Full frame lenses. The extender converts Super35 Pictor Zoom lenses to cover full frame or VistaVision sensors. It multiplies the focal length by 1.6x with only 1.5 stops of light loss.

Q: 8. Will this expander work with the Angeneiux Optimo DP 30-80mm T2.8?

A: The DZOFilm Marlin 1.6x Expander for PL Lens to PL-Mount Camera is not compatible with the Angenieux Optimo DP Rouge 30-80mm Zoom Lens with PL Mount.

Q: 9. Can you use a 4 wheel base on the track?

A: Yes you can. This system can be used with something like the Porta-Jib 3-Leg Spider Dolly (Track Wheels) which has such wheels on it, BH #POSP3T.

Q: 10. What track and tripod is best compatible with this dolly?

A: The Porta-Jib 40' FlexTrak is designed for use with this dolly, BH #POFLXT. https://bhpho.to/3ag7DMm