You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Toa Electronics 30 Watt Ul-listed Paging Speaker

Toa Electronics 30 Watt Ul-listed Paging Speaker
  • Product Code: ga217028
  • Availability: In Stock

$429.00 $664.95

TOA Electronic's CS-304U Wide-Range 30 Watt UL-Listed Paging Speaker is a 4.7" cone driver paging speaker integrated with a 70.7V/100V transformer. Designed for indoor and outdoor commercial sound system applications like background music, paging, tone-signalling, this gray speaker features superior sound quality and a wider frequency range than standard paging speakers.

UL-Listed for outdoor use, this weather-resistant, durable speaker is dust and moisture-resistant and will function in a wide range of temperatures. Built of ABS resin with stainless-steel mounting parts, this speaker would be useful in a wide variety of applications like boats, churchs, schools, swimming pools, security, and more.

This speaker comes with a 5-year warranty.

Parameters
Active or PassivePassive
Frequency Response120Hz - 15kHz
Power Capacity30W Program
Maximum Sound Pressure Level (SPL)98 dB, 1W/1m
Nominal Sensitivity98 dB
Impedance70.7V: 30W (170 ohms)
100 V: 30W (330 ohms)
CrossoverNot Specified by Manufacturer
ShieldedNo
Low Frequency Driver4.7" Cone Driver
High Frequency Driver4.7" Cone Driver
Enclosure MaterialFire-Resistant ABS Resin
Input ConnectionsNot Specified by Manufacturer
EnvironmentalSealed Enclosure, Moisture-Resistant, Stainless-Steel Mounting Hardware
Dimensions14.4 x 9.1 x 10.7" (366 x 230 x 272mm)
Weight6.8 lbs (3.1 kg)
SpecialtiesMoisture-Resistant, Built-In 70.1V/100V Transformer
Packaging Info
Package Weight8.82 lb
Box Dimensions (LxWxH)16.54 x 13.66 x 8.78"

The 70.7V/100V integrated transformer has a screwdriver-adjustable power tap for easy convertability.

With dust and moisture-resistance, a wide temperature operational range, and stainless-steel brackets, this UL-Listed speaker is suitable for both indoor and outdoor use.

Coated with polyurethane resin paint, this speaker will resist the fading effects of ultraviolet light.

A stainless-steel mesh grill protects the speaker from damage.

Related Questions and Answers

Q: 1. Does the flash bracket have enough room to fit a SB-910 over a PW FlexTT5? Thanks.

A: The bracket to which the flash is attached can be adjusted for different size flash units. Using just the SB-910, the bracket can be adjusted anothe 2 for longer accessories. As the PW flexTT5 is only 1.4 high, the combination will fit on the bracket.

Q: 2. Can the softbox be tilted forward?

A: It would need a umbrella adapter to tilt. Impact makes one you can use https://bhpho.to/2RV3t5O.

Q: 3. Will the 30L hold my McKinnon 8L camera Sling above a small or medium mirrorless core unit?

A: Yes, the McKinnon 8L camera Sling will fit in the top compartment.

Q: 4. Does the softbox tilt up and down?

A: Yes, it tilts up and down.

Q: 5. Can anyone tell me if the 30L and 35L with the same amount of gear feel about the same weight and bulk wise? Or not?

A: The Shimoda Designs Explore v2 30 Backpack Photo Starter Kit (Army Green, 30L) weighs 3.6 lb (1.65 kg). The exterior dimensions are 11.6 x 20.3 x 6.6" ( 29.5 x 51.5 x 17 cm ). The Shimoda Designs Explore v2 35 Backpack Photo Starter Kit (Army Green) weights 4.4 lb (2.0 kg), and the exterior dimensions are 11.6 x 21.2 x 7.8" ( 29.5 x 54.0 x 20.0 cm ). So, the 35L will be slightly heavier and slightly more bulk.

Q: 6. Is it reflective backing on the inside?

A: Yes, it's a highly reflective silver interior lining.

Q: 7. Is it difficult to get consistent steady flowing slides with this without it being motorized?

A: Operating a slider manually will take some practice to get down smoothly, but it is very possible with this slider.

Q: 8. Will this bag hold the tamron 150-600 without the lens hood attached. I would be using it with a nikon d7100 body?

A: you should be just fine..but with the lens hood reversed..I use for the tamron lens and my canon 7d. a tight fit but works just fine.

Q: 9. how wide is the base?I am tightening this into a RRS clamp...I need a 1.58 width...It is being secured under the base on the new Nikon s 80-400 lens.

A: The mount insert is 1.40in square. The tripod receiver is 1.42in (square also). If your tripod receiver is morethan, say, 1.43in, it'll not work.

Q: 10. Will it fits the canon EOS 5DS R with battery grip and EF 70-200 f / 2.8 IS II USM Lens?

A: The Digital Holster 50 is made to take what they call a pro camera, or DSLR with the battery grip. It will fit it with the 70-200 f /2.8 IS II lens. The bottom of the case can also extend and then you can filt the lens with the hood on it in the case.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Bogen Uti Single Zone Paging Controller

$936.96 $1,339.85

Telex 450d Handheld Paging Microphone

$387.00 $619.20

Rdl Tx-psd1 Paging Sound Detector

$393.39 $562.55

Bogen Pre-assembled 3-zone Pcm2000 Paging System

$1,691.46 $2,080.50

Products You May Like

Niceyrig Camera Cage For Canon Eos R5/r6

$161.70 $228.00

Rosco Chroma Key Paint (green, 1 Quart)

$126.00 $189.00

Makala Soprano Dolphin Ukulele (red Burst)

$177.00 $265.50

Heliopan 22.5mm Rg 1000 Infrared Filter

$205.50 $254.82