The K-Tek KEG-150CCR Avalon Series Graphite Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy graphite design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and an XLR connection at the base of the pole. A total of 5 sections telescope between 3.3 to 12.5', and will easily store in any standard equipment case. The captive-collet coupling system locks each section in place for even further reliability.

Measures 3.3 to 12.5'    Five Locking Sections    Side 3-Pin XLR Connection    Lightweight Graphite Design    Captive-Collet Coupling System

Designed to fit in any standard equipment case for ENG, EFP, and DV location production work

The KEG-150CCR features a side-mounted XLR connection at the base

Jam-resistant collar coupling

Unique pole-top design with cable retention slots and replaceable stainless steel mounting stud

Related Questions and Answers

Q: 1. hi is this the new rode video mic pro powered by 2A battery?

A: No. 9V.

Q: 2. Can you use this on cameras like the Nikon D90 or the Nikon 750?

A: Yes, this shotgun mic kit would work very well with the Nikon D90 or 750, connecting directly into the 3.5mm external mic jack on the camera.

Q: 3. Does this mic work with a Canon 7D?

A: Yes it does. Just as a word of advice, push the db up on the mic, and manually move the audio level down on your camera. The compression is terrible on the camera, and you'll get a hiss if you don't.

Q: 4. how would i mount this to a 1/4 20 mount?

A: To mount the Rode VideoMic Pro to a 1/4 -20 threading requires a reducer bushing.

Q: 5. Is it good to go on a boom with zoom h5, for short films

A: You can use this mic on top of a camera or on a boom pole. The closer to the subject, the better audio you will have.

Q: 6. Can the hot shoe be removed and what thread is used for attachment?

A: It's a cold shoe and it cannot be removed. The thread inside is a standard 3/8".

Q: 7. Does this have reverse polarity protection?

A: NOT as far as I know. Never had an issue with the cable though. Just make sure you dont force it into the ptap Connection

Q: 8. does this microphone fit on Sony A99 Mark II

A: Sure will.

Q: 9. Can this be connected and used as a PC microphone?

A: Technically yes because it runs off of a 9v battery. The proper way to do it would be to plug it into an audio interface first, but you could just run it into a microphone input on a computer. Then, set your system preferences to that mic as the input.

Q: 10. Does the Rycote Windjammer work with the foam shield on? If not, is it hard to take it off? I remember borrowing one and having the foam be impossible to take off.

A: Yes, the Rycote Windjammer is custom fit to slide over the foam. Once it is over the foam, there is a piece of velcro to fasten it snugly in place. I bought mine to use on an Alaska trip and very pleased with the results.