The Tiffen 4 x 5.65" 3 Green Hard-Edge Graduated Filter helps to specifically add a bright green coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a hard-edged transition between the density and clear areas. The 3 color density provides less green coloration than the 4 density, but more than the 2 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 4 x 5.65" / 101.6 x 143.5mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

3 Density Color Graduated Filter    Green Coloring in Select Areas    Hard-Step Graduation    ColorCore Technology

Provides a bright green coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. will this work with a smallrig cage?

A: No, the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III would not work if you connect a cage to the camera. This product was designed to be placed directly under the camera.

Q: 2. Would this work with DJI Ronin?

A: Yes, the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III can be mounted on the DJI Ronin Gimbal Stabilizer. It will need to be mounted onto the Ronin Arca-Swiss Plate and rebalanced.

Q: 3. will this work with a Sony DSC RX10IV?

A: Unfortunately, the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III is not compatible with the Sony DSC RX10 IV.

Q: 4. Will this work for A7iii?

A: SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III is not compatible with the Sony a7 III Mirrorless Camera. You can consider Silence Corner Atoll S Rotating Camera Collar for Select Sony Mirrorless Cameras (Silver) BH #SISCATOLLS https://bhpho.to/3nGfzSh.

Q: 5. is it compatible with Sony a7c and the APS-C Sony line ?

A: The SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III is not compatible with Sony a7C and APS-C Sony cameras.

Q: 6. Will this power the Canon R5 mk2?

A: Yes, the Core SWX Powerbase EDGE LITE Kit for Canon LP-E6 Batteries will power the Canon EOS R5 Mark II Mirrorless Camera.

Q: 7. Is this compatible with the Really Right Stuff Base Plate for Sony a7R V (RRS-9000170)?

A: Although SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Select Sony A-Series, FX3 & FX30 Cameras comes with a standar arca clamp that could fit Really Right Stuff Base Plate for Sony a7R V, unfortunately they are not compatible. The clamp has a safety pin release system to prevent the plate from sliding off. This design prevent other Arca plates to slide through the clamps.

Q: 8. Does it work in Sony a7R III?

A: No, the Sony A7Riii has a different size body. So with won't fit properly.

Q: 9. Windshield SPECS say Maximum Microphone Length: 6.25 (160.5mm) but NTG2 SPECS say 10.94 x .87 (278 x 22mm) (Length x Diameter) PLEASE clarify because I just placed an order ?

A: I wish I could post the picture I just took. The Windshield fits perfectly on the NTG2. 10.94 is including the section I would call the handle .

Q: 10. If the base is fixed, how can you pan? Is that base Arca Swiss compatible? Why was the pan base discontinued?

A: The Really Right Stuff PG-01 Pano-Gimbal Head with Lever-Release Clamp and Fixed Horizontal Base has an Arca plate which could be connected to a Really Right Stuff panning clamp or a Really Right Stuff ball head with a panning position.