The Tiffen 105C (Coarse Thread) Low Light Dispersion Filter is popular with cinematographer's.

The Low Light Dispersion filter (LLD) is the same shade as a traditional yellow #85 filter (The #85 series will produce natural colors when shooting with tungsten film outdoors).  However, it is used instead of the #85 in low light scenarios since it does not require the 2/3 stop light loss of the #85.

You'll find this filter opens up shadows while adding a noticeable warmth to the image.

Opens up shadows without f-stop loss

Adds a slight warmth

Related Questions and Answers

Q: 1. iS l308x-u GOOD FOR LANDSCAPE PHOTOGRAPHY?

A: This meter is fair for landscape photography, but a spot meter would be ideal.

Q: 2. Can i use this for Speedlight manual (YOngnuo 560 IV)?

A: Yes, it will work without any issue.

Q: 3. Does this light meter help to determine which f/ stop to use when using 2 lights?

A: Yes.

Q: 4. I know the string is rated at 15lb, but I am curious if we can put heavier camera with Black Bird Cine Mantis?

A: The cord/rope will hold more weight, however, the Easyrig Minimax with Quick Release is really designed for up to 15 lb payloads.

Q: 5. Does this come with the quick release / ball system? (Or must you buy the easyrig WITHOUT the stabil light)

A: The Easyrig Minimax STABIL Light Gimbal/Camera Support System does not come with the Easyrig Quick Release Camera Mount. You can find that option here: https://bhpho.to/2GETzfb

Q: 6. can this hold the ursa G2 with small 5" monitor on the rs3 pro or will that exceed the weight capacity?capacity?

A: This would depend on the weight of your monitor and the total combined load of the whole rig. The Easyrig Minimax STABIL Light Support System with Quick Release Hook can support up to 15.4 lb. The Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera (B&H # BLURSAMPG2) weighs 5.1 lb and the DJI RS 3 Pro Gimbal Stabilizer (B&H # DJRS3P) weighs 2.5 lb, so the vest could still support around an additional 7 lb of weight.

Q: 7. Can it be put on a stand if I'm using an uncorded flash without an assistant to hold the meter?

A: Unfortunately this does not have a 1/4-20 on the unit so it can not be screwed onto a stand.

Q: 8. What are the dimensions of the backdrop inside?

A: The backgrounds that come with the Godox LST80 Light Tent (31.5 x 31.5 x 31.5" are approxemelty, 30x 60 inches.

Q: 9. Can this unit trigger (and meter) a Godox flash via a PC to 3.5mm adapter cable? If so, is there any advantage to this over using the 'meter flash' mode on the meter without connecting to flash via sync cable? Thank you.

A: If your Godox flash has a 3.5mm (1/8") miniphone sync terminal, then yes, you may use a PC-to-miniphone sync cable to connect the flash to the light meter, and pressing the TEST button on the meter will trigger the flash and measure its output. Do note that the flash must be in Manual mode and you must set the flash output manually, as it will not measure TTL automatic flash output. If measured from the same distance, you should get the same/similar reading to using the Cordless Flash Mode.

Q: 10. Can the Minimax be stored with it tightened all the way, or is it best practice to loosen it when being stored?

A: The Easyrig Minimax with Quick Release must be stored in a tension released fashion to stay working properly over time.