The white Electro-Voice Sx300PIX is a 12" 2-way 300W weather-resistant passive loudspeaker offering versatile installation options and full-range sound reinforcement for a variety of indoor and outdoor environments such as warehouses, sports arenas, and retail stores. Its 12" woofer and 1" titanium-diaphragm, high-frequency compression driver yield an 80 Hz to 25 kHz frequency response, and may be driven by a constant-voltage amplifier thanks to the built-in 70.7/100V transformer. The high-frequency driver outputs through a constant-directivity Varipath horn for uniform coverage while Ring-Mode Decoupling enhances clarity.

For Indoor/Outdoor Sound Reinforcement    12" Woofer, 1" Titanium HF Driver    Built-In 70.7/100V Transformer    80 Hz to 25 kHz Frequency Response    Constant-Directivity Varipath Horn    Ring-Mode Decoupling Enhances Clarity    Paralleled Euroblock Inputs    Integrated Pole Socket and Carry Handle    Four M8 Fly Points    Weather-Resistant Polypropylene Cabinet

Compact, portable loudspeaker with high efficiency and high output for live sound, speech reproduction, and DJ/AV/institutional use

Weather-resistant design for reliable outdoor use; the four ports surrounding the woofer may be "sealed" with optional port covers to increase protection in extreme weather conditions

Built-in transformer provides compatibility with constant-voltage systems

Paralleled Euroblock connectors offer taps for 50/70/100 watts at 70.7V, or 100/140/200 watts at 100V

RMD (Ring-Mode Decoupling) for increased intelligibility

1" exit DH2010A high-frequency compression driver equipped with a titanium diaphragm and convex-drive TimePath phasing plug structure for smooth and extended high-frequency response

Compression driver voice coil is coupled to the diaphragm with Electro-Voice's exclusive Resonant Drive technology, which increases and smooths the high-frequency response and reduces the amount of internal equalization required for flat frequency response

Molded-in, constant-directivity horn with Varipath throat geometry to help the driver output to the corners of the room, areas not described in the usual specifications of horizontal and vertical coverage angles

65 x 65° uniform coverage pattern—sound quality is well maintained off-axis, even at 45° off-axis (a 90° total coverage angle)

Features Electro-Voice's PRO circuit, which prevents against accidental overdrive to the compression driver and improves system reliability—if the input power to the high-frequency driver exceeds the nominal rating, the protection circuit is activated and reduces the power delivered to the driver by 6 dB until input power is reduced to a safe level

Sturdy high-impact polyproylene trapezoidal cabinet

Powder-coated, full-face, stainless-steel grille with foam backing

Integrated 1-3/8" pole socket and four M8 attachment points enable versatile mounting and installation

Bottom-mounted rubber feet and top-panel mating sockets allow secure stacking

Related Questions and Answers

Q: 1. Does it come with an 3/8"-16 screw adapter?

A: No, Manfrotto Befree 3-Way Live Head does not include a 1/4"-20 to 3/8"-16 bushing Adapter in the box. You will need to purchase this accessory separately.

Q: 2. Will the camera point in the proper direction on this head if I have a RRS L bracket attached to the camera?

A: Yes, you can mount an RRS L bracket in the orientation you want on this head.

Q: 3. I want non padded pouch for travel, when head is detached from tripod. Which one is large enough to fit Benro? I am looking at Tenba Neoprene one https://www.bhphotovideo.com/c/product/1374639-REG/tenba_636_353_tools_soft_lens_pouch.html or Lenscoat https://www.bhphotovideo.com/c/product/547496-REG/LensCoat_LCLPLWBK_LensPouch_Large_Wide_Black.html. What can you recommend?

A: The two you were looking into will not fit the head. I'd recommend a 15 inch or 19 inch lens wrap for it.

Q: 4. Can someone please confirm if this head is compatible with the Manfrotto 190XB? TIA!

A: Yes, the Manfrotto Befree 3-Way Live Head is compatible with the Manfrotto MT190X3 Aluminum Tripod. However, this tripod head is designed for lightweight and travel tripods. I would also recommend looking at the Manfrotto XPRO 3-Way, Pan-and-Tilt Head with 200PL-14 Quick Release Plate (BH #MAMHXPRO3W).

Q: 5. Will this fit on the Manfrotto MT190XPRO4 Legs?

A: Yes it will.

Q: 6. How do you tilt the head up & down?

A: Twist the handles counter-clockwise to loosen the head along the axis, then push or pull for movement. Feel free to chat with us over video on our new superstore video live-chat function and we can demonstrate it for you if you're still having trouble!

Q: 7. Does the Peak Design standard plate fit the Benro?

A: Yes, the Peak Design PL-S-3 Standard Plate is compatible with the Benro GD3WH 3-Way Geared Head.

Q: 8. 1. Can this head be swapped with the 494 on a Manfrotto BeFree Advanced tripod? 2. Can this take a Canon 90D mounted with EF 100-400 MKII?

A: Yes, the Manfrotto Befree 3-Way Live Head can be used on the Manfrotto BeFree Advanced tripod. And yes you can use that setup with a Canon 90D and EF 100-400 II. Note you should use a sandbag on that tripod with the camera and lens to help prevent it from tipping.

Q: 9. Can the entire head be removed so a different head could be put on?

A: No. The head is permanently attached.

Q: 10. Is the unit able to be used on the Big Element travel tripod?

A: Yes.