The Tiffen 3 x 4" 2 Cranberry Soft-Edge Graduated Filter helps to specifically add a magenta-like, pinkish-red coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 2 color density provides less cranberry coloration than the 3 density, but more than the 1 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 4" / 76.2 x 101.6mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

2 Density Color Graduated Filter    Cranberry Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a reddish magenta coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Does it fit the Leica Q2 ?

A: This case is best for a bridge type point and shoot camera. A more suitable case for the Leica Q2 is the Leica Ettas Pouch (Stone Gray), LEQ2EPCCG https://bhpho.to/37pAnkM

Q: 2. Is this the same mount as the 300pro ?

A: The following unit is designed and made for the following two units ML30 and ML30Bi LED Lights. But will 100% mount to the Godox 300 pro creating a nice soft light.

Q: 3. I need a simple snug fitting case to protect my camera from minor bumps and scratches in my messenger bag. Would this case be suitable for a Sony RX1R with lens hood?

A: The D-Shortie will fit the RX1, however I'd advise you to reverse the lens hood when storing the camera to avoid breaking/damaging it.

Q: 4. Is this compatible with the Sony a7siii with the Smallrig 3241 cage? I understand that with 3667 yes is compatible.

A: You shouldn't have any compatibility issues with the SmallRig 3241. You'll just mount the arca plate to 3241 and you may have to adjust the collar's height so it fits properly.

Q: 5. Will this fit a Nikon D3300 with a 18-55mm Lens? Thanks!

A: This case will not fit that body and lens set up. The LensCoat BodyBag Compact with Lens will fit that kit better. Website link: http://bhpho.to/1hD432I

Q: 6. Do any EF to Sony adapters fit this?

A: We tested a few different adapters with the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III. It doesn't seem to fit with any adapters.

Q: 7. Fits on the A7IV with the SmallRig Cage Rinoceros on it?

A: No the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III does not fit with the SmallRig Rhinoceros Basic Cage Kit on it.

Q: 8. iFootage Shark Slider Motion Control Kit can work with iFootage Shark Slider Mini ?

A: I would think not. They have different width of tracks and different designs. The carriage for the Motion Control Kit would not work with the slider of the Mini. This is meant for smaller setups. Sure, you could attach the pan/tilt mechanism to the carriage of the mini, but that would be pointless as you'd need separate control for mating the 2 systems. Use the Motion Control Kit on the S1 slider.

Q: 9. Will a Sony RX100V fit in this case?

A: This pouch works very well for the RX100V, I even have the Sony grip on it as well and it is a perfect fit. Very happy with the case and the ease of closure and figment.

Q: 10. will this work with a Sony DSC RX10IV?

A: Unfortunately, the SmallRig Rotatable Horizontal-to-Vertical Mount Plate Kit for Sony a7R IV, a7R V, a7 IV & a7S III is not compatible with the Sony DSC RX10 IV.