Presented in a green finish with a gold grille for an eye-catching vintage look, the MXL V67G condenser microphone is also designed to impart a classic sound that can be described as warm and mellow, making it an affordable solution for thickening vocals without EQ. With its Class-A FET circuitry and transformer-coupled output, it can provide sonic traits often associated with old tube mics. Since it is a solid-state condenser with an XLR output, it should be connected to a mic preamp that supplies standard 48V phantom power.

The V67G is a side-address mic with a 1" gold-sputtered large diaphragm capable of capturing plenty of detail. Its somewhat wide cardioid polar pattern yields generous pickup at the front and sides of the mic while offering significant rejection of sound at the rear, which helps lessen the presence of room noise in home recordings. To further optimize the V67G for vocal sessions, accessories such as a foam windscreen, pop filter, and shockmount are available separately.

Designed for Vocals    XLR Output for Hookup to Mic Preamp    48V Phantom Powered    Includes Stand Adapter    Cardioid Polar Pattern Reduces Ambience    Full Midrange Adds Body    Transformer-Balanced Output    1" Gold-Sputtered Diaphragm    Class-A FET Circuitry    Includes Zipper Pouch

Designed mainly for vocals, the V67G combines Class-A FET circuitry and a transformer-coupled output resulting in a pure and warm sound that's akin to the mellow vibe of an old-school tube mic. Rather than opting for transparency, its frequency response features a thicker midrange that adds body to vocals.

The V67G has a 1" gold-sputtered diaphragm and a fairly wide cardioid pickup pattern that is least sensitive to sound behind the mic. Large-capsule condensers such as the V67G are very sensitive, readily revealing subtle sonic details.

Due to its balanced XLR output and solid-state condenser electronics, the V67G should be connected via an XLR mic cable (available separately) to the mic input of a device that can supply 48V phantom power.

• 1" gold-sputtered diaphragm
• Class-A FET circuitry
• Transformer-balanced output
• 30 Hz to 20 kHz frequency response
• 130 dB maximum SPL
• 48V phantom powered
• XLR 3-pin connector
• Includes stand mount and zipper pouch

Related Questions and Answers

Q: 1. Does this mic work when plugged into a Sennheiser G2 or G3 wirless transmitter?

A: Yes

Q: 2. Will this mic work when it's directly plugged into a Zoom H1?

A: The Smartlav+ features a 3.5mm TRRS connector not directly compatible with standard audio recorder inputs. An adapter such as the Rode SC3 is required.

Q: 3. Will this enlarger handle 120 negatives?

A: You will need the Beseler 6 x 7 upgrade kit for the Printmaker 35 enlarger: https://bhpho.to/3qVwizj

Q: 4. To use this to shoot video with an iPhone7 do you have to use a certain app or will the camera on your phone in video mode work fine?

A: I tested with an Iphone 6, and the camera on the phone work fine, don't need any other app, the camera recognize the external microphone and use it when it is plugged.

Q: 5. I am noticing the light is stronger in the middle, making my photographs darker and the edges are lighter. Am I missing a diffuser or using it incorrectly?

A: Please review the following enlarger lens. We highly suggest using Rodenstock or Schneider lens to prevent any vignette issues you may be experiencing. https://bhpho.to/3HgRLJG

Q: 6. I am being given this enlarger today by some one who doesn't need it, her husband died and it was his. I am interested in the 6x7 upgrade or do you have a 6x6 upgrade...? How do I find it on your site?

A: Both are under the accessory section of the item. However, you can use these links below:https://a href= http://www.bhphotovideo.com/c/product/4666-REG/ target= _blank www.bhphotovideo.com/c/product/4666-REG//ahttps://a href= http://www.bhphotovideo.com/c/product/4669-REG/ target= _blank www.bhphotovideo.com/c/product/4669-REG//a

Q: 7. Anyone used this as a replacement mic for Sennheiser Wireless Lavalier systems? How have your results been?

A: I got this part and used it with a zoom recorder. Result was very poor quality. However I used with iphone and it works great. It says for SmartPhone in the name and it is not just a suggestion.

Q: 8. does it work with macbook?

A: Yes, the RODE SmartLav+ Lavalier Condenser Microphone will work with MacBook computers that have a 3.5mm input for a microphone.

Q: 9. Can you use this to print on 4x6 paper? I want to be able to make several prints without committing to a full 8X10 page.

A: You can use this enlarger to make 4 x 6 prints, depending on the easel that you're using to crop the print to size.

Q: 10. Hello I purchased this product and am looking for this part Can you help me 6x7cm upgrade kit

A: BH #BENC6767 is the Beseler 6x7cm Glassless Negative Carrier. https://bhpho.to/3a26t5Q